درباره ما
MIL-PRF-24647E
PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 2013
Abstract: This specification covers ship hull anticorrosive and antifouling paint systems.Intended Use: This specification covers a variety of high grade paint systems. These coatings are intended for application to ship hulls to prevent marine biofouling and corrosion. Types I and II antifouling topcoat paints are intended to polish (erode or ablate) under water flow conditions to provide a biofouling free, smooth hull for fuel efficiency. Type III antifouling topcoat paints are intended to provide a foul-release topcoat while Type IV antifouling topcoat paints provide biofouling control without eroding. The paint systems covered by this specification include paints that can be applied to steel, aluminum, and rubber substrates. Antifouling paint conforming to present air protection regulations (1990) is required as Grade A, but the specification provides grades at lesser VOC levels to encourage manufacturers to develop more environmentally acceptable materials. Except for the biocide-containing antifouling topcoats of Types I, II, and IV, the individual dried paint residues and dry paint contaminated debris may constitute non-hazardous waste.
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T17:03:30Z | |
| date available | 2017-09-04T17:03:30Z | |
| date copyright | 04/09/2013 | |
| date issued | 2013 | |
| identifier other | XXGFCFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/127102 | |
| description abstract | This specification covers ship hull anticorrosive and antifouling paint systems.Intended Use: This specification covers a variety of high grade paint systems. These coatings are intended for application to ship hulls to prevent marine biofouling and corrosion. Types I and II antifouling topcoat paints are intended to polish (erode or ablate) under water flow conditions to provide a biofouling free, smooth hull for fuel efficiency. Type III antifouling topcoat paints are intended to provide a foul-release topcoat while Type IV antifouling topcoat paints provide biofouling control without eroding. The paint systems covered by this specification include paints that can be applied to steel, aluminum, and rubber substrates. Antifouling paint conforming to present air protection regulations (1990) is required as Grade A, but the specification provides grades at lesser VOC levels to encourage manufacturers to develop more environmentally acceptable materials. Except for the biocide-containing antifouling topcoats of Types I, II, and IV, the individual dried paint residues and dry paint contaminated debris may constitute non-hazardous waste. | |
| language | English | |
| title | MIL-PRF-24647E | num |
| title | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL | en |
| type | standard | |
| page | 22 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013 | |
| contenttype | fulltext |