درباره ما
IEEE C57.16
Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
Year: 2011
Abstract: This standard applies to series-connected dry-type air-core single-phase and three-phase outdoor or indoor reactors of distribution and transmission voltage class that are connected in the power system to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type air-core reactors covered by this standard are self-cooled by natural air convection.
With some restrictions, this standard is applicable to filter reactors, shunt capacitor reactors (used with shunt capacitor banks), and discharge current-limiting reactors (used with series capacitor banks). Annex A, Annex B, and Annex C are included to provide guidance.
This standard does not apply to devices such as
a) Shunt reactors (see IEEE Std C57.21™-2008)1
b) Arc suppression coils
c) Neutral grounding devices (see IEEE Std 32™-1972 [B21])2
d) Line resonant reactors
e) High-voltage direct current (HVDC) smoothing reactors (IEEE Std 1277™-2010 [B23])
f) Forced cooled reactorsg) Line traps and radio interference (RI) filter reactors (ANSI C93.3-1995)
Purpose
The purpose of this standard is to define the requirements and test code for series-connected dry-type aircore reactors and, with some restrictions, filter reactors, shunt capacitor reactors, and discharge currentlimiting reactors.
1 Information on references can be found in Clause 2.
2 Numbers in brackets correspond to the numbers in the bibliography in Annex G.
With some restrictions, this standard is applicable to filter reactors, shunt capacitor reactors (used with shunt capacitor banks), and discharge current-limiting reactors (used with series capacitor banks). Annex A, Annex B, and Annex C are included to provide guidance.
This standard does not apply to devices such as
a) Shunt reactors (see IEEE Std C57.21™-2008)1
b) Arc suppression coils
c) Neutral grounding devices (see IEEE Std 32™-1972 [B21])2
d) Line resonant reactors
e) High-voltage direct current (HVDC) smoothing reactors (IEEE Std 1277™-2010 [B23])
f) Forced cooled reactorsg) Line traps and radio interference (RI) filter reactors (ANSI C93.3-1995)
Purpose
The purpose of this standard is to define the requirements and test code for series-connected dry-type aircore reactors and, with some restrictions, filter reactors, shunt capacitor reactors, and discharge currentlimiting reactors.
1 Information on references can be found in Clause 2.
2 Numbers in brackets correspond to the numbers in the bibliography in Annex G.
Subject: air-core reactors
Show full item record
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T17:05:19Z | |
| date available | 2017-09-04T17:05:19Z | |
| date copyright | 40847 | |
| date issued | 2011 | |
| identifier other | YCDNUEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/128883 | |
| description abstract | This standard applies to series-connected dry-type air-core single-phase and three-phase outdoor or indoor reactors of distribution and transmission voltage class that are connected in the power system to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type air-core reactors covered by this standard are self-cooled by natural air convection. With some restrictions, this standard is applicable to filter reactors, shunt capacitor reactors (used with shunt capacitor banks), and discharge current-limiting reactors (used with series capacitor banks). Annex A, Annex B, and Annex C are included to provide guidance. This standard does not apply to devices such as a) Shunt reactors (see IEEE Std C57.21™-2008)1 b) Arc suppression coils c) Neutral grounding devices (see IEEE Std 32™-1972 [B21])2 d) Line resonant reactors e) High-voltage direct current (HVDC) smoothing reactors (IEEE Std 1277™-2010 [B23]) f) Forced cooled reactorsg) Line traps and radio interference (RI) filter reactors (ANSI C93.3-1995) Purpose The purpose of this standard is to define the requirements and test code for series-connected dry-type aircore reactors and, with some restrictions, filter reactors, shunt capacitor reactors, and discharge currentlimiting reactors. 1 Information on references can be found in Clause 2. 2 Numbers in brackets correspond to the numbers in the bibliography in Annex G. | |
| language | English | |
| title | IEEE C57.16 | num |
| title | Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors | en |
| type | standard | |
| page | 127 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011 | |
| contenttype | fulltext | |
| subject keywords | air-core reactors | |
| subject keywords | discharge current-limiting reactors | |
| subject keywords | dry-type air-core reactors | |
| subject keywords | drytype reactors | |
| subject keywords | filter reactors | |
| subject keywords | harmonic filters | |
| subject keywords | IEEE C57.16 | |
| subject keywords | reactors | |
| subject keywords | series capacitor bank applications | |
| subject keywords | series reactor applications | |
| subject keywords | series-connected reactors | |
| subject keywords | shunt capacitor bank applications | |
| subject keywords | shunt capacitor reactors |