DIN - Deutsches Institut für Normung e. V.: Recent submissions

Now showing items 1721-1740 of 22183

    • DIN EN 14459 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This European Standard specifies methods for the classification and assessment of function blocks designed to operate burners and appliances burning gaseous or liquid fuels with particular regards to their fault ...

    • DIN EN ISO 14801 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2017
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International Standard specifies a method of dynamic testing of single post endosseous dental implants of the transmucosal type in combination with their premanufactured prosthetic components. It is most useful ...

    • DIN ISO 50003 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International Standard specifies requirements for competence, consistency and impartiality in the auditing and certification of energy management systems (EnMS) for bodies providing these services. In order to ...

    • DIN EN ISO 21007-2 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This part of ISO 21007 establishes a common flexible framework for data structure to enable the unambiguous identification in gas cylinder (GC) applications and for other common data elements in this sector. This ...

    • DIN EN ISO 23146 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International Standard specifies a method for the determination of the fracture toughness of advanced technical ceramics. The procedure makes use of single-edge V-notched bars, which are loaded in four-point ...

    • VG 95345-23 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: Diese Norm gilt für Sonderzubehör das in Verbindung mit den Schutzschaltern nach VG 95345-6, VG 95345-11, VG 95345-17, VG 95345-20 und VG 95345-21 angewendet wird.

    • DIN EN 62056-6-2 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2017
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This part of IEC 62056 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model ...

    • DIN EN ISO 14272 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International Standard specifies specimen dimensions and a testing procedure for the cross tension testing of spot and projection welds in overlapping sheets in any metallic material of thickness 0,5 mm to 3 ...

    • DIN EN ISO 13940 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International standard defines a system of concepts for different aspects of the provision of healthcare. The core business in healthcare is the interaction between subjects of care and healthcare professionals. ...

    • DIN EN 14306 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature ...

    • DIN EN ISO 18403 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This International Standard specifies a test method intended to determine the maximum lateral force applied to a slide fastener for footwear under which it will close without failure. The method is applicable to all ...

    • DIN EN 16578 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This European Standard specifies sustainability requirements together with assessment methods and evaluation schemes for ceramic sanitary appliances, i.e. WC pans and WC suites in accordance with EN 997, urinals in ...

    • DIN EN 755-8 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded porthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with ...

    • DIN EN 4179 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2017
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: PURPOSE This European Standard establishes the minimum requirements for the qualification and certification of personnel performing nondestructive testing (NDT), nondestructive inspection (NDI), or nondestructive ...

    • DIN EN ISO 19901-1 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: There is no abstract information for this document.

    • DIN EN 61800-7-301 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This part of IEC 61800 specifies the mapping of the profile type 1 (CiA 402) specified in IEC 61800-7-201 onto different network technologies. The functions specified in this part of IEC 61800-7 are not intended to ...

    • DIN ISO 10110-9 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: ISO 10110 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. This part of ISO 10110 specifies rules for ...

    • DIN EN 12405-3 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: Part 3 of this European Standard specifies the requirements and tests for the construction, performance, safety and conformity of flow computers (FCs) used to meet the metrological and technical requirements of a ...

    • DIN EN 1755 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This European Standard applies to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053-1 including their load handling devices and attachments (hereafter referred ...

    • DIN EN 62264-4 

      Type: standard
      Source: DIN - Deutsches Institut fš?r Normung e. V.:;2016
      Organization : DIN - Deutsches Institut fš?r Normung e. V.
      Abstract: Scope: This part defines object models and attributes exchanged between Level 3 manufacturing operations management activities defined in IEC 62264-3.