درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 1741-1760 of 22183
-
DIN EN 61800-7-1
Abstract: Scope: This part of IEC 61800 specifies a generic interface between power drive system(s) (PDS) and the application control program in a controller. The generic PDS interface is not specific to any particular communication ... -
DIN EN ISO 16373-1
Abstract: Scope: This part of ISO 16373 gives the definition of the colourant classes and the relationship to textile fibres. It describes some procedures to identify qualitatively the colourant class used in textile material. -
DIN EN 13209-2
Abstract: Scope: This European Standard specifies the safety requirements and test methods for soft carriers without a framed support incorporating integral leg openings designed to carry a child when attached to the carer’s ... -
DIN EN 13480-2 BERICHTIGUNG 2
Abstract: Scope: This document (EN 13480-2:2012) has been prepared by Technical Committee CEN/TC 267 “Industrial piping and pipelines”, the secretariat of which is held by AFNOR. This European Standard shall be given the ... -
DIN EN ISO 18452
Abstract: Scope: This International Standard specifies a method for the determination of the film thickness of a fine ceramic film and ceramic coatings by a contact-probe profilometer. The method is suitable for film thicknesses in ... -
DIN EN ISO 8362-2
Abstract: Scope: This part of ISO 8362 specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4. The dimensional requirements are not ... -
DIN EN 10314
Abstract: Scope: This European Standard specifies a method for deriving the minimum proof strength values for steels at elevated temperatures. However, this European Standard does not specify a verification procedure. -
DIN EN ISO 17641-2
Abstract: Scope: This part of ISO 17641 specifies the required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: — T-joint ... -
DIN EN ISO 14123-1
Abstract: Scope: This part of ISO 14123 establishes principles for the control of risks to health resulting from hazardous substances emitted by machinery. This part of ISO 14123 is not applicable to substances that are a hazard to ... -
DIN CEN/TS 419221-3
Abstract: Scope: This Technical Standard specifies a protection profile for cryptographic module for CSP key generation services. -
DIN EN 772-1
Abstract: Scope: This European Standard specifies a method for determining the compressive strength of masonry units. -
DIN EN 13538-3
Abstract: Scope: This European Standard specifies a method of measurement of the volume under load of sleeping bags and a method of calculation of easiness of packing of sleeping bags filled with feather and/or down. -
DIN EN 9239
Abstract: Scope: Dieses Dokument ermöglicht es, spezifische Erfordernisse im Bereich der Luftfahrt zu bedienen, auch wenn es keine branchenspezifischen Besonderheiten aufweist und dadurch ebenfalls für die Erfordernisse ... -
DIN EN 1073-1
Abstract: Scope: This European Standard specifies the requirements and test methods for protective clothing, ventilated by an independent supply of air from an uncontaminated source, protecting the body and the respiratory system ... -
DIN EN 62769-3
Abstract: Scope: Dieser Teil von IEC 62769 legt den FDI-Server fest. Die gesamtheitliche FDI-Architektur ist in Bild 1 dargestellt. Die im Anwendungsbereich dieses Dokumentes liegenden Architekturkomponenten sind in diesem Bild ... -
DIN EN ISO 4126-5
Abstract: Scope: This part of ISO 4126 specifies the requirements for controlled safety pressure relief systems (CSPRS) irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter ... -
DIN EN ISO 4641
Abstract: Scope: This document specifies the minimum requirements for textile-reinforced, smooth-bore rubber watersuction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to ... -
DIN EN 13523-29
Abstract: Scope: This part of the EN 13523 series specifies a procedure for the comparative evaluation of resistance to soiling of an organic coating on a metallic substrate (coil coating) in an outdoor exposure environment, ... -
DIN SPEC 91400
Abstract: Scope: The scope of DIN SPEC 91400 covers the whole field of setting up and working with building information models. By using the catalogue data from the DIN SPEC 91400 building information models can be equipped with ... -