درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1081-1100 of 2147
-
MIL-I-81969/1A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tools described herein shall consist of this document and the latest ... -
MIL-T-7743F
Abstract: This specification covers laboratory tests to be used in determining the suitability of all types of store suspension equipment intended for military aircraft use. Intended Use: The tests of this specification ...Subject(s) : Ejector system , Icing test , Incubation mixed spore suspension , Manual function tests , Rain test , Salt spray , Sinusoidal spray , -
MIL-C-29600/7
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the connectors described herein shall consist of this specification and the ... -
MIL-C-85485/8
Abstract: This specification sheet is approved for use by all departments and agencies of the Department of Defense.
The complete requirements for procuring the cable described herein shall consist of this document and the issue ... -
MIL-W-8982D
Abstract: This specification covers high strength, splined, thin-wall wrenches used for the installation and removal of spline, high strength and high temperature aircraft fasteners (see 6.1). Intended Use: The ...Subject(s) : High Strength , Splined , Thin Wall , Wrenches , -
MIL-PRF-81757/15B
Abstract: Intended Use: Add the following after the last sentence: "The M81757/15-X limitedrepair battery is designed so that its cells and all components associated with installing the cells cannot be removed and ... -
MIL-C-81953
Abstract: This specification covers electrodes, "S" and pigtail type cable for magnetic minesweeping.
Magnetic minesweeping cables shall be classified as follows:
Type Electrode - Noninsulated, single conductor, buoyant. ... -
MIL-R-25669A
Abstract: This specification covers the general requirement for one type of Radiosonde Receptor designated as the AN/AMR-3. Intended Use: The Radiosonde Receptor AN/AMR-3 covered by this specification is a receiver-recorder ... -
MIL-DTL-81748E (2)
Abstract: This specification covers the requirements for the preparation of Rapid Action Changes (RACs) and Interim Rapid Action Changes (IRACs) to Technical Manuals (TMs) under the cognizance of the Naval Air Systems Command ...Subject(s) : Change Type B , -
MIL-DTL-32086 VALID NOTICE 1
Abstract: This specification establishes the technical requirements for a body-worn, 9-volt D.C. battery-powered, portable intercom to be used with, and form part of, a Chemical, Biological, Radiological (CBR) protective assembly ...Subject(s) : Acoustic , Aircrewman , Biological , CBR protective , Chemical , Distortion , Frequency response , Harmonic distortion , High gain , Intercom , Radiological , -
A-A-59315/37
Abstract: This commercial item description sheet (CID) covers a magnesium zircinate powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
A-A-59315/11
Abstract: This commercial item description sheet (CID) covers a pure nickel powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-L-81174/1B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
Complete requirements for procuring the light described herein shall consist of this document and the issue in effect ... -
MIL-HDBK-800
Abstract: This handbook provides guidance for the implementation of documentation streamlining.
The purpose of documentation streamlining is to reduce acquisition costs through improved definition of product/process requirements; ...