Search

Abstract: Intended Use: These clamp supports are intended for use with MIL-DTL-85052/1, /2, and /3 clamps in very high vibration application and as a repair technique in problem areas. Do not use these supports unless ...

Request PDF

MIL-C-6026B: CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1959

Organization : NAVY - AS - Naval Air Systems Command

Abstract: This specification covers manual pressure-generating brake control units as defined by Specification MIL-H-5440. Intended Use: The control units covered by this specification are intended for use in aircraft ...

Request PDF

MIL-B-81793/12 (1): BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC 7P

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1994

Organization : NAVY - AS - Naval Air Systems Command

Request PDF

MIL-D-81609C (1): DETECTING SET, MAGNETIC AN/ASQ-81(V)

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1986

Organization : NAVY - AS - Naval Air Systems Command

Request PDF

MIL-C-14242B (3): CABLE ASSEMBLIES, FUZE CONTROL

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1970

Organization : NAVY - AS - Naval Air Systems Command

Request PDF

MIL-W-81822/15A (1): WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-CHLOROTRIFLUOROETHYLENE (ECTFE) INSULATION, SILVER COATED SOLID CONDUCTOR

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1994

Organization : NAVY - AS - Naval Air Systems Command

Request PDF

MIL-I-81969/12A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION A

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1979

Organization : NAVY - AS - Naval Air Systems Command

Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tools described herein shall consist of this document and the latest ...

Request PDF

MIL-I-81969/26A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1 OR 2, COMPOSITION A, (FOR REMOVAL OF INTEGRATED CIRCUIT PACKAGES AND SIMILAR DEVICES FROM SOCKETS, RECEPTACLES, OR PRINTED WIRING BOARDS)

Type: standard

Source: NAVY - AS - Naval Air Systems Command:;1978

Organization : NAVY - AS - Naval Air Systems Command

Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tool described herein shall consist of this document and the latest issue ...

Request PDF

1
2
3
4
. . .
215

Archive

Organization

Year

Keywords

Type

Language (ISO)

Content Type

Search

MIL-F-8815/4A VALID NOTICE 1: FILTER, FLUID, PRESSURE, HYDRAULIC LINE, 3000 PSI, ABSOLUTE 5 MICRON, STYLE A, BYPASS, -65 DEGREES TO PLUS 275 DEGREES F

MIL-DTL-7793/14A: METER, TIME TOTALIZING, MINIATURE, DIGITAL, 28 VDC OR 26 VAC, 50 TO 2400 Hz, SQUARE

MIL-DTL-85052/4A: CLAMP SUPPORT - LOOP, CLAMP

MIL-C-6026B: CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM

MIL-B-81793/12 (1): BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC 7P

MIL-D-81609C (1): DETECTING SET, MAGNETIC AN/ASQ-81(V)

MIL-C-14242B (3): CABLE ASSEMBLIES, FUZE CONTROL

MIL-W-81822/15A (1): WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-CHLOROTRIFLUOROETHYLENE (ECTFE) INSULATION, SILVER COATED SOLID CONDUCTOR

MIL-I-81969/12A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION A

MIL-I-81969/26A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1 OR 2, COMPOSITION A, (FOR REMOVAL OF INTEGRATED CIRCUIT PACKAGES AND SIMILAR DEVICES FROM SOCKETS, RECEPTACLES, OR PRINTED WIRING BOARDS)

Search

Filters

MIL-F-8815/4A VALID NOTICE 1: FILTER, FLUID, PRESSURE, HYDRAULIC LINE, 3000 PSI, ABSOLUTE 5 MICRON, STYLE A, BYPASS, -65 DEGREES TO PLUS 275 DEGREES F

MIL-DTL-7793/14A: METER, TIME TOTALIZING, MINIATURE, DIGITAL, 28 VDC OR 26 VAC, 50 TO 2400 Hz, SQUARE

MIL-DTL-85052/4A: CLAMP SUPPORT - LOOP, CLAMP

MIL-C-6026B: CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM

MIL-B-81793/12 (1): BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC 7P

MIL-D-81609C (1): DETECTING SET, MAGNETIC AN/ASQ-81(V)

MIL-C-14242B (3): CABLE ASSEMBLIES, FUZE CONTROL

MIL-W-81822/15A (1): WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-CHLOROTRIFLUOROETHYLENE (ECTFE) INSULATION, SILVER COATED SOLID CONDUCTOR

MIL-I-81969/12A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION A

MIL-I-81969/26A: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1 OR 2, COMPOSITION A, (FOR REMOVAL OF INTEGRATED CIRCUIT PACKAGES AND SIMILAR DEVICES FROM SOCKETS, RECEPTACLES, OR PRINTED WIRING BOARDS)