درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1181-1200 of 2147
-
MIL-T-22007A
Abstract: The equipment covered by this specification shall be capable of functioning as a d-c power source for Radiosonde Set AN/AMT-11(), as a resistive load for activation of Battery BA-353/AM, and as a current and voltage monitor ... -
MIL-C-81582/8B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the adapter described herein shall consist of this document and ... -
MIL-C-81582B
Abstract: This specification covers environment-resisting, quick disconnect, EMI/RFI shielded and non-shielded umbilical, electric connectors and adapter assemblies with removable crimp or nonremovable solder-type contacts and ... -
MIL-S-81746/4
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the Servtorqs described herein shall consist of this specification sheet and the issue ... -
GG-P-455B
Abstract: This specification covers the requirements for photosensitive anodized aluminum sheets and foils. For purposes of this specification, foils as referred to in this specification is defined as material 0.010 inch and thinner. ... -
A-A-59315/36
Abstract: This commercial item description sheet (CID) covers a chromium oxide powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-S-22820B
Abstract: This specification covers the general requirements for servomotor-tachometer generators integrally built in the same housing utilizing the same shaft. It is not complete in itself, but must be used in conjunction with ...Subject(s) : Axis-error voltage , Calibration speed , Control winding , Damping constant , Effective resistance , First article , Frequency sensitivity , In-phase speed-sensitive transformation ratio , Linearity , Position-error voltage , Quadrature-phase speed-sensitive transformation ratio , Qualification , Qualified products list (QPL) , Quality conformance , Reference winding , Servomotor , Stall torque linearity , Tachometer generator , Voltage sensitivity , Zero-speed output voltage , -
A-A-59315/10
Abstract: This commercial item description sheet (CID) covers a nickel-aluminum alloy powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MS3326 VALID NOTICE 1
Abstract: NOTICE OF VALIDATION
MS3326 (AS) dated 12 Jun 1968, has been reviewed and determined to be current. -
MIL-DTL-9370E
Abstract: This specification covers automatic pressure-regulating valves for anti-g suits. Intended Use: The pressure regulating valve covered by this specification is intended for use in aircraft to sense changes in ...Subject(s) : Deceleration , -
QPL-21718-1
Abstract: This list has been prepared for use by or for the Govenment in the procurement of products covered by the subject specification and such listing of a product is not intended to and does not connote indorsement of the product ... -
MIL-S-85376A
Abstract: This specification covers a helicopter maintenance stand used by personnel aboard aviation capable ships. Intended Use: The servicing stand is intended for maintenance of SH-2 and SH-60 aircraft aboard ... -
MIL-T-81556A
Abstract: This specification covers aircraft quality titanium and titanium and titanium alloy extruded metal bar and shape products. Intended Use: The products acquired under this specification are intended for ... -
MIL-R-8592/3
Abstract: This specification covers the detailed requirements for the survivors sling. The general requirements are covered in MIL-R-8592. Intended Use: The helicopter survivors sling covered by this specification is ...