درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1461-1480 of 2147
-
MIL-D-85520
Abstract: This specification covers the general requirements for the design and installation of on board oxygen generating systems (OBOGS) in military aircraft. Intended Use: The design and installation requirements ... -
MIL-DTL-23549D VALID NOTICE 2
Abstract: This specification covers the requirements for one type and grade of a general purpose molybdenum disulfide grease for extended use at temperatures up to 177 degrees C (350 degrees F) and for brief periods of use at ...Subject(s) : Dropping point , Lubrication , Mineral oil , Molybdenum disulfide , Oil separation , Penetration , -
MIL-I-81969/10A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tools described herein shall consist of this document and the latest ... -
A-A-59313
Abstract: This commercial item description (CID) covers a zinc dust-petrolatum antiseize thread compound. The thread compound is generally used to prevent seizing during assembly or disassembly of threaded or unthreaded aluminum and ... -
MIL-L-6723C
Abstract: This specification covers general requirements for aircraft lights.
The lights shall be furnished in the following types as specified:
Type I - Without ANVIS compatible filters.
Type II - ...Subject(s) : ANVIS compatible , Lighting , aircraft , -
MIL-STD-1651A
Abstract: This standard gives the dimensional requirements for insert arrangements used in MIL-C-5015, MIL-C-22992 (Classes C, J and R), and MIL-C-83723 (Series II) electrical connectors. Intended Use: This standard ...Subject(s) : Alternate insert positions , Insert position , Pin contact , Shell size , Socket contact , -
MIL-STD-5522
Abstract: This standard establishes test and test method requirements for aircraft and weapons hydraulic and emergency pneumatic systems design and installation with operating pressure ranges from 3,000 psi to 8,000 psi and temperature ...Subject(s) : Air system test , Engine test , Flight capability , Fluid system test , Functional inspection , Ground cart test , Methodology , Mission profile , Operational inspection , Simulator test , -
MIL-PRF-81380E
Abstract: This specification covers aviation fuel contamination filter/monitor elements and housings. Intended Use: This fuel contamination filter/monitor for use in aviation fuel dispensing systems exceeds commercially ...Subject(s) : Aircraft , Gasoline , Impurity , Sensor , -
MIL-PRF-131K
Abstract: This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging. Intended Use: The barrier ...Subject(s) : Packaging , Plastic backing , Preservation , Water vapor transmission , -
MIL-S-81746/1
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for Acquiring the Servtorqs described herein shall consist of this specification sheet and the issue ... -
MIL-I-18804B
Abstract: This specification covers design and all performance requirements for the 2-inch nominal size vertical speed indicator with a range of 0-6000 feet per minute ascent and descent.
The indicators shall be of the following ... -
A-A-59315/33
Abstract: This commercial item description sheet (CID) covers a chromium carbide powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
A-A-59315/7
Abstract: This commercial item description sheet (CID) covers a nickel-chromium alloy powder that is applied using either plasma arc or combustion gas (flame spray) techniques.