NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1581-1600 of 2147
-
MIL-T-85230A
Abstract: This specification covers the requirements for the design, fabrication, inspection, and test of the TDU-34A/A Aerial Tow Target herein referred to as target. Intended Use: The basic target will be loaded on ...Subject(s) : Air-to-air gunnery training , Gunnery firings , Gunnery spot , Missile training , Surface to air gunnery training , training , -
A-A-59315/6
Abstract: This commercial item description sheet (CID) covers a cobalt base powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-C-85001/172
Abstract: This specification establishes the design, performance, manufacture, and acceptance requirements for a chaff countermeasures designated RR-172/ALE. This equipment consists of a chaff roll loaded with flat aluminum dipoles ... -
AS-3789
Abstract: This specification provides the reguirements and procedures for the rework of castings for Harpoon.Intended Use: This process is intended to be sued for the rework by welding of casting discontinuities which ... -
QPL-AMS-S-4383-QPD
Abstract: QUALIFIED PRODUCTS LIST (MILITARY) OF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION SAE-AMS-S-4383 SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE
This QPL has been prepared for use by or for ... -
MIL-M-81392
Abstract: This specification covers the manufacture, assembly, preparation for delivery of the Marker, Location, Marine Mk 25 and Mods 2 and 3, and the methods of examination and tests upon which product acceptance shall be based. ... -
MIL-R-8592/1
Abstract: This specification covers the detailed requirements for the rescue cable grip. The general requirements are covered in MIL-R-8592. Intended Use: The helicopter rescue equipment covered by this specification ... -
MIL-DTL-5578D
Abstract: This specification covers self-sealing and partially self-sealing fuel tanks for use on aircraft. A tank consists of a cell or group of cells interconnected and the components attached directly thereto, to form a complete ...Subject(s) : Slosh , -
MIL-B-913/15
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-PRF-32070A
Abstract: This specification covers the technical requirements for Test Program Sets (TPSs)Intended Use: TPSs described herein consist of software, hardware, and operating instructions and are intended to be used with ...Subject(s) : Ancillary equipment , Calculations , Ambiguity Group Size , Fault isolation , Fixture , Fixture , Holding , Footprint , operational , Interface device , Line Replaceable Unit , Shop Replaceable Assembly , Shop Replaceable Unit , Weapons Replaceable Assembly , -
MIL-C-22520/20
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the crimping tools described herein shall consist of this document and the ...

درباره ما