NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1781-1800 of 2147
-
MIL-S-85419
Abstract: This specification covers a gas turbine starter/APU for starting the main aircraft engine and providing emergency electrical power on the AV-8B aircraft. This specification also establishes the content and format to be ... -
MIL-PRF-85726B
Abstract: This specification covers forced air-cooled standard avionics enclosures, hereinafter referred to as enclosures. The enclosures accommodate Standard Electronic Modules (SEMs) Format B Span 2, Format C, and Format E, and ...Subject(s) : Aircraft , Backplane , Electronic , Modules , Protrusions , -
MIL-PRF-81836B
Abstract: This specification covers hydraulic fluid pressure filters and disposable filter elements which retain all particles larger than three microns absolute. Intended Use: The filter and filter element covered ...Subject(s) : Filtration , Fluid systems , Petroleum ether , Support equipment , -
A-A-59315/30
Abstract: This commercial item descrip#on sheet (CID) covers a tungsten carbide-cobalt powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-PRF-29597C (3)
Abstract: This specification covers the requirements of flexible odor barrier bags used for the disposal of food contaminated plastic waste.Intended Use: The bags provide an odor barrier for the containment of ...Subject(s) : Water vapor transmission rate , -
A-A-59315/4
Abstract: This commercial item description sheet (CID) covers an aluminum-silicon powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-C-21189
Abstract: This specification establishes the requirements for high strength-weight ratio Dacron (polyester fiber) cloth laminated with chloroprene for use in the manufacture of airship envelopes. Intended Use: The ... -
MIL-DTL-6363/6A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ... -
MIL-I-85370
Abstract: This specification covers the manufacture and acceptance of one type of yellow iron oxide (see 6.1). Intended Use: The material specified herein is intended for use as a burning rate modifier in ...Subject(s) : Iron oxide , Material safety data sheet , -
MIL-R-8592B
Abstract: This specification covers the general requirements for helicopter rescue equipment. Specific requirements are covered in the applicable detail specifications (see 6.3). Intended Use: The helicopter ... -
MIL-B-913/13
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-S-85334
Abstract: This specification establishes the requirements for one type of inert, permanently mastic silicone type sealing compound modified with a flow control additive, for sealing or resealing integral fuel tanks on military ... -
MIL-DTL-85769B VALID NOTICE 1
Abstract: This specification covers the Mk 117 Mod 0 Rocket Motor for the BQM-74C target drone. Intended Use: The rocket motors provide auxiliary thrust to launch, from either ground or ship, the BQM-74C target drone. ...Subject(s) : Ignition delay , Thrust , Total impulse ,

درباره ما