درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1921-1940 of 2147
-
MIL-C-81511/41A
Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for ... -
MIL-STD-1290A
Abstract: Purpose. This document establishes minimum crash resistance criteria for implementation in the initial stages of aircraft system design.
Classification. The requirements of this specification pertain to ...Subject(s) : Crash resistance , aircraft , design for , Crash resistance , fixed wing , light aircraft , Crash resistance , rotary-wing aircraft , -
W-L-101/118A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
MIL-W-81822/11A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the wire described herein shall consist of this document and the issue in ... -
MIL-PRF-81352C VALID NOTICE 1
Abstract: This specification covers general touch-up coatings for use on aircraft and support equipment. The volatile organic compound (VOC) content of these coatings is less than 340 grams/liter (g/l) (2.837 lbs/gal). Intended ...Subject(s) : Acrylic , Alkyd , Polyurethane , -
MIL-E-85113
Abstract: This specification covers the requirements for the manufacture and acceptance of one type of plastic-bonded, extrudable explosive material, referred to herein as PBXC-203(I). Intended Use: PBXC-203(I) is ... -
W-L-101/105A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
DOD-G-85733
Abstract: This specification covers the requirements for one type and grade of a high temperature grease for uses at temperatures from −29°C to 260°C and for brief periods of use at temperatures up to 370°C (see ...Subject(s) : Catapult launch valves , Catapult systems , Grease , Grease , high temperature , -
MIL-C-81313
Abstract: This specification establishes the requirements for the procurement of four types of Air Launched Weapons Cradles and two types of Cradle Stacking Frames for use with the above Cradles.
Equipment supplied under this ... -
MIL-E-85082A
Abstract: This specification covers the requirements for all types of analog shaft angle input to digital output encoders. It is not complete in itself, but should be used in conjunction with MIL-S-81963 which will form an integral ...Subject(s) : Bit rate , Breakaway torque , Capacity (total count) , Code , Conversion time , Dynamic accuracy , Electrical noise , First article , Interrogation current , Life test , Mission readiness , Moment of inertia , Position sensitivity , Quality conformance , Readout , Recovery time , Resolution , Reverse bias impedance , Running torque , Scan , Shock , mechanical , Shock , temperature , Slew speed , Transition accuracy , Transition gradient , Zero position , -
DI-SESS-81522B
Abstract: Use/relationship: The Course Conduct Information Package provides data required by the Government to support outsourcing the conduct of training. This data will provide sufficient information to permit an ...