درباره ما
MSS SP-135
High Pressure Knife Gate Valves
Year: 2010
Abstract: This Standard Practice covers the construction requirements for lug- and wafer-type knife gate valves made from ASME Code materials and meeting the applicable gate valve requirements of ASME B16.34.
This Standard Practice covers flanged body designs compatible with ASME B16.5 flanges for NPS 2 (DN 50) through NPS 24 (DN 600) and ASME B16.47 Series A flanges for NPS 26 (DN 650) through NPS 48 (DN 1200).
As an alternative to Section 1.1, this Standard Practice also covers valves that do not meet the body wall thickness of ASME B16.34 but shall be qualified by a proof test. The Class 150 and Class 300 dimensional, material, and other requirements of this Standard Practice shall apply to these valves.
This Standard Practice covers flanged body designs compatible with ASME B16.5 flanges for NPS 2 (DN 50) through NPS 24 (DN 600) and ASME B16.47 Series A flanges for NPS 26 (DN 650) through NPS 48 (DN 1200).
As an alternative to Section 1.1, this Standard Practice also covers valves that do not meet the body wall thickness of ASME B16.34 but shall be qualified by a proof test. The Class 150 and Class 300 dimensional, material, and other requirements of this Standard Practice shall apply to these valves.
Show full item record
| contributor author | MSS - Manufacturers Standardization Society of the Valve and Fittings Industry. | |
| date accessioned | 2017-09-04T17:06:48Z | |
| date available | 2017-09-04T17:06:48Z | |
| date copyright | 01/01/2010 | |
| date issued | 2010 | |
| identifier other | YGAZCDAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/130339 | |
| description abstract | This Standard Practice covers the construction requirements for lug- and wafer-type knife gate valves made from ASME Code materials and meeting the applicable gate valve requirements of ASME B16.34. This Standard Practice covers flanged body designs compatible with ASME B16.5 flanges for NPS 2 (DN 50) through NPS 24 (DN 600) and ASME B16.47 Series A flanges for NPS 26 (DN 650) through NPS 48 (DN 1200). As an alternative to Section 1.1, this Standard Practice also covers valves that do not meet the body wall thickness of ASME B16.34 but shall be qualified by a proof test. The Class 150 and Class 300 dimensional, material, and other requirements of this Standard Practice shall apply to these valves. | |
| language | English | |
| title | MSS SP-135 | num |
| title | High Pressure Knife Gate Valves | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.:;2010 | |
| contenttype | fulltext |