MSS SP-80

Bronze Gate, Globe, Angle, and Check Valves

contributor author	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.
date accessioned	2017-09-04T17:09:03Z
date available	2017-09-04T17:09:03Z
date copyright	01/01/2013
date issued	2013
identifier other	YMACCFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/132578
description abstract	This Standard Practice establishes requirements for bronze gate, globe, angle, and check valves for general purpose services and provides requirements for the following: a) Pressure-Temperature Ratings b) Materials c) End Connections (Design) d) Dimensions (Design) e) Markings f) Inspection and Testing PURPOSE This MSS Standard Practice establishes requirements for bronze gate, globe, angle, and check valves in Classes 125 (PN 20), 150 (PN 20), 200, 300 (PN 50) and 350 for threaded and solder ends and Classes 150 (PN 20) and 300 (PN 50) for flanged ends. Pressures in this Standard Practice are expressed as gauge pressure in pounds per square inch (Kilopascals). Hereafter the pressure will appear as psi (kPa).
language	English
title	MSS SP-80	num
title	Bronze Gate, Globe, Angle, and Check Valves	en
type	standard
page	35
status	Active
tree	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.:;2013
contenttype	fulltext