درباره ما
MSS SP-80
Bronze Gate, Globe, Angle, and Check Valves
Year: 2013
Abstract: This Standard Practice establishes requirements for bronze gate, globe, angle, and check valves for general purpose services and provides requirements for the following:
a) Pressure-Temperature Ratings
b) Materials
c) End Connections (Design)
d) Dimensions (Design)
e) Markings
f) Inspection and Testing
PURPOSE
This MSS Standard Practice establishes requirements for bronze gate, globe, angle, and check valves in Classes 125 (PN 20), 150 (PN 20), 200, 300 (PN 50) and 350 for threaded and solder ends and Classes 150 (PN 20) and 300 (PN 50) for flanged ends. Pressures in this Standard Practice are expressed as gauge pressure in pounds per square inch (Kilopascals). Hereafter the pressure will appear as psi (kPa).
a) Pressure-Temperature Ratings
b) Materials
c) End Connections (Design)
d) Dimensions (Design)
e) Markings
f) Inspection and Testing
PURPOSE
This MSS Standard Practice establishes requirements for bronze gate, globe, angle, and check valves in Classes 125 (PN 20), 150 (PN 20), 200, 300 (PN 50) and 350 for threaded and solder ends and Classes 150 (PN 20) and 300 (PN 50) for flanged ends. Pressures in this Standard Practice are expressed as gauge pressure in pounds per square inch (Kilopascals). Hereafter the pressure will appear as psi (kPa).
Show full item record
| contributor author | MSS - Manufacturers Standardization Society of the Valve and Fittings Industry. | |
| date accessioned | 2017-09-04T17:09:03Z | |
| date available | 2017-09-04T17:09:03Z | |
| date copyright | 01/01/2013 | |
| date issued | 2013 | |
| identifier other | YMACCFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/132578 | |
| description abstract | This Standard Practice establishes requirements for bronze gate, globe, angle, and check valves for general purpose services and provides requirements for the following: a) Pressure-Temperature Ratings b) Materials c) End Connections (Design) d) Dimensions (Design) e) Markings f) Inspection and Testing PURPOSE This MSS Standard Practice establishes requirements for bronze gate, globe, angle, and check valves in Classes 125 (PN 20), 150 (PN 20), 200, 300 (PN 50) and 350 for threaded and solder ends and Classes 150 (PN 20) and 300 (PN 50) for flanged ends. Pressures in this Standard Practice are expressed as gauge pressure in pounds per square inch (Kilopascals). Hereafter the pressure will appear as psi (kPa). | |
| language | English | |
| title | MSS SP-80 | num |
| title | Bronze Gate, Globe, Angle, and Check Valves | en |
| type | standard | |
| page | 35 | |
| status | Active | |
| tree | MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.:;2013 | |
| contenttype | fulltext |