SMD-5962-87602 REV A

DLA - CC - DLA Land and Maritime

MICROCIRCUITS, BIPOLAR, 16-BIT ERROR DETECTION AND CORRECTION UNIT, MONOLITHIC SILICON

Organization:

Year: 1988

Abstract: This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example:

The device type shall identify the circuit function as follows:

          Device type          Generic number                Circuit function                01                    2960       16-bit error detection and correction unit

The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:

          Outline letter                                Case outline               X              D-14 (48-lead, 2.435" × .620" × .225"), dual-in-line package.              Y              (48-lead, 1.235" × .660" × .098"), top braze flat package (see figure 1).              U              C-6 (52-terminal, .761 × .761 × .120"), square chip carrier package.              Z              (52-terminal, .760" × .760" × .075"), thin square chip carrier package                               (see figure 2).

     Supply voltage range - - - - - - - - -  - - - - - -   −0.5 V dc to +7.0 V dc      Input voltage range - - - - - - - - - - - - - - - -   −0.5 V dc to +5.5 V dc      Storage temperature range - - - - - - - - - - - - -   −65°C to +150°C      Maximum power dissipation (P_D)- - - - - - - - - - -   2.2 W      Lead temperature (soldering, 10 seconds)- - - - - -   +300°C      Thermal resistance, junction-to-case (θ_JC):        Cases X and U - - - - - - - - - - - - - - - - - -   See MIL-M-38510, appendix C        Case Y- - - - - - - - - - - - - - - - - - - - - -   30°C/W  1/        Case Z- - - - - - - - - - - - - - - - - - - - - -   30°C/W  1/      Junction temperature (T_J) - - - - - - - - - - - - -   +185°C      DC voltage applied to outputs for high output state   −0.5 V to V_CC (maximum)      DC output current, into outputs - - - - - - - - - -   30 mA      DC input current- - - - - - - - - - - - - - - - - -   −30 mA to +5.0 mA

     Supply voltage (V_CC)- - - - - - - - - - - - - - -  4.5 V dc minimum to 5.5 V dc maximum      Minimum high level input voltage (V_IH)- - - - - -  2.0 V dc      Maximum low level input voltage (V_IL) - - - - - -  0.8 V dc      Case operating temperature range (T_C) - - - - - -  −55°C to +125°C

Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.

URI: https://yse.yabesh.ir/std/handle/yse/136417

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T17:12:57Z
date available	2017-09-04T17:12:57Z
date copyright	07/26/1988
date issued	1988
identifier other	YWSUDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/136417
description abstract	This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". The complete part number shall be as shown in the following example: The device type shall identify the circuit function as follows: Device type Generic number Circuit function 01 2960 16-bit error detection and correction unit The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows: Outline letter Case outline X D-14 (48-lead, 2.435" × .620" × .225"), dual-in-line package. Y (48-lead, 1.235" × .660" × .098"), top braze flat package (see figure 1). U C-6 (52-terminal, .761 × .761 × .120"), square chip carrier package. Z (52-terminal, .760" × .760" × .075"), thin square chip carrier package (see figure 2). Supply voltage range - - - - - - - - - - - - - - - −0.5 V dc to +7.0 V dc Input voltage range - - - - - - - - - - - - - - - - −0.5 V dc to +5.5 V dc Storage temperature range - - - - - - - - - - - - - −65°C to +150°C Maximum power dissipation (P_D)- - - - - - - - - - - 2.2 W Lead temperature (soldering, 10 seconds)- - - - - - +300°C Thermal resistance, junction-to-case (θ_JC): Cases X and U - - - - - - - - - - - - - - - - - - See MIL-M-38510, appendix C Case Y- - - - - - - - - - - - - - - - - - - - - - 30°C/W 1/ Case Z- - - - - - - - - - - - - - - - - - - - - - 30°C/W 1/ Junction temperature (T_J) - - - - - - - - - - - - - +185°C DC voltage applied to outputs for high output state −0.5 V to V_CC (maximum) DC output current, into outputs - - - - - - - - - - 30 mA DC input current- - - - - - - - - - - - - - - - - - −30 mA to +5.0 mA Supply voltage (V_CC)- - - - - - - - - - - - - - - 4.5 V dc minimum to 5.5 V dc maximum Minimum high level input voltage (V_IH)- - - - - - 2.0 V dc Maximum low level input voltage (V_IL) - - - - - - 0.8 V dc Case operating temperature range (T_C) - - - - - - −55°C to +125°C Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
language	English
title	SMD-5962-87602 REV A	num
title	MICROCIRCUITS, BIPOLAR, 16-BIT ERROR DETECTION AND CORRECTION UNIT, MONOLITHIC SILICON	en
type	standard
page	26
status	Active
tree	DLA - CC - DLA Land and Maritime:;1988
contenttype	fulltext