ASTM B574

Abstract

This specification² covers rod of low-carbon nickelchromium- molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and N06059)*, low-carbon nickelmolybdenum- chromium (USN N10362), low-carbon nickelmolybdenum- chromium-tantalum (UNS N06210), low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), and low-carbon nickel-chromium-molybdenum-tungsten (UNS N06686) as shown in Table 1, for use in general corrosive service. <br>The following products are covered under this specification: <br>Rods ⁵&#8260;₁₆ to &#190;in. (7.94 to 19.05 mm), exclusive, in diameter, hot or cold finished, solution annealed and pickled, or mechanically descaled. <br>Rods &#190;to 3 &#189; in. (19.05 to 88.9 mm), inclusive, in diameter, hot or cold finished, solution annealed, ground or turned. <br>Rods &#188; to 3 &#189; in. (6.35 to 88.9 mm), inclusive, in diameter, solution annealed, cold finished, as cold finished, ground or turned (N06059 and N06686 only, see Table 2 and Table 3). <br>The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use</em>. <br><strong>*A Summary of Changes section appears at the end of this standard.</strong> <br>² For ASME Boiler and Pressure Vessel Code applications see related Specification SB-574 in Section II of that Code. <br>* New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS)