درباره ما
AASHTO M 163M/M 163
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T17:18:15Z | |
| date available | 2017-09-04T17:18:15Z | |
| date copyright | 01/01/2007 (R 2012) | |
| date issued | 2012 | |
| identifier other | CCABYEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/141612 | |
| description abstract | This specification covers iron-chromium and iron-chromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent types of alloy castings suitable for broad ranges of application, which are intended for a wide variety of corrosion environments. Note 1—For alloy castings for severe corrosion-resistant service, reference should be made to M 285M/M 285. For general heat-resistant alloy castings, reference should be made to ASTM A 297/A 297M. For nickel alloy castings for corrosion-resistant service, reference should be made to ASTM A 494/A 494M. The values stated either in SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. SI units are applicable for material ordered to M 163M and inch-pound units are applicable for material ordered to M 163. | |
| language | English | |
| title | AASHTO M 163M/M 163 | num |
| title | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | en |
| type | standard | |
| page | 11 | |
| status | Active | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;2012 | |
| contenttype | fulltext |
