Abstract: The dual in-line sockets of assessed quality covered by this detail specification shall have:
a) Maximum enclosure dimensions (See Figure 1, 1 A, 2, and 3,).
b) Working voltage not to exceed 250 volts ír.m.s.1. ...

Abstract: This test method applies to the measurement of x-radiation emitted from microwave tubes.
Purpose To obtain the x-radiation characteristics of microwave tubes in order to determine the levels emitted by the tubes when ...

Abstract: Scope and purpose
This document is intended to aid in the development and/or revision of EIA standards. This is not meant to be an all inclusive document and can be subject to reconsideration.

Abstract: This Standard describes the requirements for paper and film-paper dielectric capacitors with other than poly chlorinated byphenyl (PCB) impregnants, hermetically sealed in metal cases for general purpose applications on ...

Abstract: This document defines methods to evaluate the coupled condition of a connector plug, with its mating receptacle. This procedure assesses the ability of a connector pair to remain fully mated after exposure to test conditions ...

Abstract: This Standard covers the general requirements for current-carrying filters, alternating-current (ac) and direct-current (dc), for use primarily in the reduction of broadband radio interference.
Portions of latest ...

Abstract: This standard establishes a test method for determining if connectors or sockets can withstand exposure to soldering conditions either by soldering iron, solder dip, solder wave, or reflow soldering techniques.
Object ...

Abstract: This Standard applies to dry reed switches, magnetically actuated, with hermetically sealed contacts. The Standard provides the procedure to be used for inspecting, testing and rating various switch types as defined in the ...

Abstract: This standard covers industrial grade RF coils which are intended as simple inductive elements in RF circuits. They are primarily intended for machine packaging, insertion and soldering on printed wiring boards.
NOTE: ...

Abstract: This document defines a Product Life Cycle curve model for use by the electronics industry to standardize the terms and definitions used to describe the life cycle status of a product.. When required by the customer, a ...