درباره ما
DSCC-DWG-94043 REV A
CONNECTOR, ELECTRICAL, RECTANGULAR, HIGH DENSITY NANOMINIATURE, LOBE KEYED, RECEPTACLE, RIGHT ANGLE, THROUGH HOLE TERMINATED (.050 AND .100 INCH TERMINATION SPACING)
Organization:
DLA - CC - DLA Land and Maritime
Year: 2000
Abstract: This drawing outlines the requirements for a specific member of a family of compact high contact density (.025 inch) two piece nanominiature electrical connectors. These connectors are intended for printed circuit board, attached cable or fixed panel mounting/termination. The connectors detailed in this specification are single or double row contact configurations with attached wire/cable termination elements. Contact count ranges from 9 to 65 contacts. Jackscrews are provided for connector locking to a mating connector half.
Connector specified in this specific requirements drawing must be capable of operating in the following environments:
a. Temperature from −65°C to +125°C with temperature cycling.
b. Altitudes from sea level to 21,336 meters (70,000 ft).
c. Moisture conditions up to 100{}elative humidity.
d. Dust and fine sand atmosphere.
e. Salt laden atmosphere.
f. Vibration conditions to 20 g's.
g. Shock conditions up to 100 g's.
h. Free space vacuum environment. Intended Use: Connectors conforming to this drawing are intended for use when military specifications do not exist and qualified military connectors that will perform the required function are not available for OEM applications. This drawing is intended to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When a military specification exists and the product covered by this drawing has been qualified for listing on a Qualified Product List (QPL), this drawing will be inactivated and will not be used for new design. The QPL will then become the preferred item for all applications.
Connector specified in this specific requirements drawing must be capable of operating in the following environments:
a. Temperature from −65°C to +125°C with temperature cycling.
b. Altitudes from sea level to 21,336 meters (70,000 ft).
c. Moisture conditions up to 100{}elative humidity.
d. Dust and fine sand atmosphere.
e. Salt laden atmosphere.
f. Vibration conditions to 20 g's.
g. Shock conditions up to 100 g's.
h. Free space vacuum environment. Intended Use: Connectors conforming to this drawing are intended for use when military specifications do not exist and qualified military connectors that will perform the required function are not available for OEM applications. This drawing is intended to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When a military specification exists and the product covered by this drawing has been qualified for listing on a Qualified Product List (QPL), this drawing will be inactivated and will not be used for new design. The QPL will then become the preferred item for all applications.
Collections
:
-
Statistics
DSCC-DWG-94043 REV A
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:23:30Z | |
| date available | 2017-09-04T17:23:30Z | |
| date copyright | 06/16/2000 | |
| date issued | 2000 | |
| identifier other | ZZKQMAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/146794 | |
| description abstract | This drawing outlines the requirements for a specific member of a family of compact high contact density (.025 inch) two piece nanominiature electrical connectors. These connectors are intended for printed circuit board, attached cable or fixed panel mounting/termination. The connectors detailed in this specification are single or double row contact configurations with attached wire/cable termination elements. Contact count ranges from 9 to 65 contacts. Jackscrews are provided for connector locking to a mating connector half. Connector specified in this specific requirements drawing must be capable of operating in the following environments: a. Temperature from −65°C to +125°C with temperature cycling. b. Altitudes from sea level to 21,336 meters (70,000 ft). c. Moisture conditions up to 100{}elative humidity. d. Dust and fine sand atmosphere. e. Salt laden atmosphere. f. Vibration conditions to 20 g's. g. Shock conditions up to 100 g's. h. Free space vacuum environment. Intended Use: Connectors conforming to this drawing are intended for use when military specifications do not exist and qualified military connectors that will perform the required function are not available for OEM applications. This drawing is intended to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When a military specification exists and the product covered by this drawing has been qualified for listing on a Qualified Product List (QPL), this drawing will be inactivated and will not be used for new design. The QPL will then become the preferred item for all applications. | |
| language | English | |
| title | DSCC-DWG-94043 REV A | num |
| title | CONNECTOR, ELECTRICAL, RECTANGULAR, HIGH DENSITY NANOMINIATURE, LOBE KEYED, RECEPTACLE, RIGHT ANGLE, THROUGH HOLE TERMINATED (.050 AND .100 INCH TERMINATION SPACING) | en |
| type | standard | |
| page | 11 | |
| status | Revised | |
| tree | DLA - CC - DLA Land and Maritime:;2000 | |
| contenttype | fulltext |