درباره ما
IEEE 383
Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
Year: 2008
Abstract: This standard provides general requirements, direction, and methods for qualifying Class 1E electric cables, field splices, factory splices, and factory rework for service in nuclear power generating stations. Categories of cables covered are those used for power, control, and instrumentation services, including signal and communication cables. Field cables, wires, and splices are within the scope of this standard. Cables, wires, and splices within or integral to other devices (e.g., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable device standard or IEEE Std 323TM-1983,1 as appropriate. However, this standard's requirements may be applied to the wire and cable within these devices.
Purpose
The purpose of this standard is to provide specific direction for the implementation of IEEE Std 323-1983 as it pertains to the qualification of electrical cables and field splices.
1Information on references can be found in Clause 2.
Purpose
The purpose of this standard is to provide specific direction for the implementation of IEEE Std 323-1983 as it pertains to the qualification of electrical cables and field splices.
1Information on references can be found in Clause 2.
Subject: class 1E electric cables
Show full item record
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T17:24:57Z | |
| date available | 2017-09-04T17:24:57Z | |
| date copyright | 12/12/2003 (R 2008) | |
| date issued | 2008 | |
| identifier other | CGESPCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/148035 | |
| description abstract | This standard provides general requirements, direction, and methods for qualifying Class 1E electric cables, field splices, factory splices, and factory rework for service in nuclear power generating stations. Categories of cables covered are those used for power, control, and instrumentation services, including signal and communication cables. Field cables, wires, and splices are within the scope of this standard. Cables, wires, and splices within or integral to other devices (e.g., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable device standard or IEEE Std 323TM-1983,1 as appropriate. However, this standard's requirements may be applied to the wire and cable within these devices. Purpose The purpose of this standard is to provide specific direction for the implementation of IEEE Std 323-1983 as it pertains to the qualification of electrical cables and field splices. 1Information on references can be found in Clause 2. | |
| language | English | |
| title | IEEE 383 | num |
| title | Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations | en |
| type | standard | |
| page | 22 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008 | |
| contenttype | fulltext | |
| subject keywords | class 1E electric cables | |
| subject keywords | factory rework | |
| subject keywords | factory splices | |
| subject keywords | field splices | |
| subject keywords | qualified life | |
| subject keywords | representative cable | |
| subject keywords | representative splices |