درباره ما
SMD-5962-92331
MICROCIRCUIT, DIGITAL, CMOS, COORDINATE TRANSFORMER, 16X16 BIT, MONOLITHIC SILICON
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:27:48Z | |
| date available | 2017-09-04T17:27:48Z | |
| date copyright | 34260 | |
| date issued | 1993 | |
| identifier other | CNWXDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/150927 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 TMC2330V CMOS Coordinate Transformer, 16 × 16 Bit, 55 ns 02 TMC2330V1 CMOS Coordinate Transformer, 16 × 16 Bit, 45 ns The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X CMGA5-P120 120 Pin grid array Y CQCC1-G132 132 Gullwing leaded chip carrier The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for crass M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply Voltage range . . . . . . . . . . . . . . . . −0.5V dc TO 7.0V dc Input Voltage range . . . . . . . . . . . . . . . . −0.5V dc to VDD +0.5 V dc Applied output voltage range 2/ . . . . . . . . . . −0.5V dc to VDD +0.5V dc Forced output current 3/ . . . . . . . . . . . . . . −6.0 mA to 12.0 mA Output short circuit duration 4/ . . . . . . . . . . 1 second Power dissipation, unloaded (PD) . . . . . . . . . . 975 mW Junction temperature (TJ) . . . . . . . . . . . . . . +175°C Lead temperature (soldering, 10 seconds) . . . . . . +300°C Thermal resistance, junction-to-case (θJC) . . . . . See MIL-STD-1835 Supply voltage range (VDD) . . . . . . . . . . . . . 4.5V dc to 5.5V dc Input LOW voltage (VIL) . . . . . . . . . . . . . . . −8V dc maximum Input HIGH voltage (VIH) . . . . . . . . . . . . . . 2.0V dc minimum Input LOW current (IOL) . . . . . . . . . . . . . . . 8 mA maximum Input HIGH current (IOH) . . . . . . . . . . . . . . −4mA minimum Cycle time (Tcy) Device type 01 . . . . . . . . . . . . . . . . . 55 ns minimum Device type 02 . . . . . . . . . . . . . . . . 45 ns minimum Clock pulse width, LOW (TPWL) Device type 01 . . . . . . . . . . . . . . . . 11 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 8 ns minimum Clock pulse width, HIGH (TPWH) Device type 01 . . . . . . . . . . . . . . . . . 8 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 6 ns minimum Data Input setup time (tS) Device type 01 . . . . . . . . . . . . . . . . . 13 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 11 ns minimum. Data Input hold time (tH) . . . . . . . . . . . . . . 2 ns minimum Case operating temperature range (TC) . . . . . . . . −55°C to +125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . XX percent 5/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-92331 | num |
| title | MICROCIRCUIT, DIGITAL, CMOS, COORDINATE TRANSFORMER, 16X16 BIT, MONOLITHIC SILICON | en |
| type | standard | |
| page | 19 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1993 | |
| contenttype | fulltext |
