SMD-5962-92331

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, DIGITAL, CMOS, COORDINATE TRANSFORMER, 16X16 BIT, MONOLITHIC SILICON

Organization:

Year: 1993

Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example:

Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:

         Device type                  Generic number                             Circuit function               01                         TMC2330V           CMOS Coordinate Transformer, 16 × 16 Bit, 55 ns              02                         TMC2330V1          CMOS Coordinate Transformer, 16 × 16 Bit, 45 ns

The device class designator shall be a single letter identifying the product assurance level as follows:

         Device class                                  Device requirements documentation                M                          Vendor self-certification to the requirements for non-JAN class B                                          microcircuits in accordance with 1.2.1 of MIL-STD-883              Q or V                       Certification and qualification to MIL-I-38535

The case outline(s) shall be as designated in MIL-STD-1835 and as follows:

         Outline letter        Descriptive designator        Terminals        Package style                 X                      CMGA5-P120                 120          Pin grid array                 Y                      CQCC1-G132                 132          Gullwing leaded chip carrier

The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for crass M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.

          Supply Voltage range  . . . . . . . . . . . . . . . . −0.5V dc TO 7.0V dc           Input Voltage range   . . . . . . . . . . . . . . . . −0.5V dc to V_DD +0.5 V dc           Applied output voltage range 2/   . . . . . . . . . . −0.5V dc to V_DD +0.5V dc           Forced output current 3/  . . . . . . . . . . . . . . −6.0 mA to 12.0 mA           Output short circuit duration 4/  . . . . . . . . . .  1 second           Power dissipation, unloaded (P_D)  . . . . . . . . . .  975 mW           Junction temperature (T_J) . . . . . . . . . . . . . . +175°C           Lead temperature (soldering, 10 seconds)  . . . . . .  +300°C           Thermal resistance, junction-to-case (θ_JC)  . . . . .  See MIL-STD-1835

        Supply voltage range (V_DD)  . . . . . . . . . . . . . 4.5V dc to 5.5V dc         Input LOW voltage (V_IL) . . . . . . . . . . . . . . . −8V dc maximum         Input HIGH voltage (V_IH)  . . . . . . . . . . . . . . 2.0V dc minimum         Input LOW current (I_OL) . . . . . . . . . . . . . . . 8 mA maximum         Input HIGH current (I_OH)  . . . . . . . . . . . . . . −4mA minimum           Cycle time (T_cy)              Device type 01 . . . . . . . . . . . . . . . . . 55 ns minimum              Device type 02   . . . . . . . . . . . . . . . . 45 ns minimum           Clock pulse width, LOW (T_PWL)              Device type 01   . . . . . . . . . . . . . . . . 11 ns minimum              Device type 02 . . . . . . . . . . . . . . . . . 8 ns minimum           Clock pulse width, HIGH (T_PWH)              Device type 01 . . . . . . . . . . . . . . . . . 8 ns minimum              Device type 02 . . . . . . . . . . . . . . . . . 6 ns minimum           Data Input setup time (t_S)              Device type 01 . . . . . . . . . . . . . . . . . 13 ns minimum              Device type 02 . . . . . . . . . . . . . . . . . 11 ns minimum.         Data Input hold time (t_H) . . . . . . . . . . . . . . 2 ns minimum         Case operating temperature range (T_C) . . . . . . . . −55°C to +125°C

    Fault coverage measurement of manufacturing       logic tests (MIL-STD-883, test method 5012) . . . . . . XX percent 5/

Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.

URI: https://yse.yabesh.ir/std/handle/yse/150927

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T17:27:48Z
date available	2017-09-04T17:27:48Z
date copyright	34260
date issued	1993
identifier other	CNWXDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/150927
description abstract	This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 TMC2330V CMOS Coordinate Transformer, 16 × 16 Bit, 55 ns 02 TMC2330V1 CMOS Coordinate Transformer, 16 × 16 Bit, 45 ns The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X CMGA5-P120 120 Pin grid array Y CQCC1-G132 132 Gullwing leaded chip carrier The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for crass M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply Voltage range . . . . . . . . . . . . . . . . −0.5V dc TO 7.0V dc Input Voltage range . . . . . . . . . . . . . . . . −0.5V dc to V_DD +0.5 V dc Applied output voltage range 2/ . . . . . . . . . . −0.5V dc to V_DD +0.5V dc Forced output current 3/ . . . . . . . . . . . . . . −6.0 mA to 12.0 mA Output short circuit duration 4/ . . . . . . . . . . 1 second Power dissipation, unloaded (P_D) . . . . . . . . . . 975 mW Junction temperature (T_J) . . . . . . . . . . . . . . +175°C Lead temperature (soldering, 10 seconds) . . . . . . +300°C Thermal resistance, junction-to-case (θ_JC) . . . . . See MIL-STD-1835 Supply voltage range (V_DD) . . . . . . . . . . . . . 4.5V dc to 5.5V dc Input LOW voltage (V_IL) . . . . . . . . . . . . . . . −8V dc maximum Input HIGH voltage (V_IH) . . . . . . . . . . . . . . 2.0V dc minimum Input LOW current (I_OL) . . . . . . . . . . . . . . . 8 mA maximum Input HIGH current (I_OH) . . . . . . . . . . . . . . −4mA minimum Cycle time (T_cy) Device type 01 . . . . . . . . . . . . . . . . . 55 ns minimum Device type 02 . . . . . . . . . . . . . . . . 45 ns minimum Clock pulse width, LOW (T_PWL) Device type 01 . . . . . . . . . . . . . . . . 11 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 8 ns minimum Clock pulse width, HIGH (T_PWH) Device type 01 . . . . . . . . . . . . . . . . . 8 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 6 ns minimum Data Input setup time (t_S) Device type 01 . . . . . . . . . . . . . . . . . 13 ns minimum Device type 02 . . . . . . . . . . . . . . . . . 11 ns minimum. Data Input hold time (t_H) . . . . . . . . . . . . . . 2 ns minimum Case operating temperature range (T_C) . . . . . . . . −55°C to +125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . XX percent 5/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
language	English
title	SMD-5962-92331	num
title	MICROCIRCUIT, DIGITAL, CMOS, COORDINATE TRANSFORMER, 16X16 BIT, MONOLITHIC SILICON	en
type	standard
page	19
status	Active
tree	DLA - CC - DLA Land and Maritime:;1993
contenttype	fulltext