AASHTO M 254

Standard Specification for Corrosion-Resistant Coated Dowel Bars

contributor author	AASHTO - American Association of State Highway and Transportation Officials
date accessioned	2017-09-04T17:29:27Z
date available	2017-09-04T17:29:27Z
date copyright	2006.01.01 (R 2015)
date issued	2015
identifier other	CSCXKFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/152470
description abstract	This specification covers the materials, manufacture, and installation of coated dowel bars to be used where corrosion-resistant performance is essential and may be used in lieu of stainless or other approved noncorrosive metals. The dowel shall consist of a steel core covered by an organic coating. The coated dowels shall be one of the two following types: Type A—The coating material develops sufficiently low-bond strength with concrete that a bond breaker is not required. Type B—The coating material develops bond strength with concrete such that a bond breaker is required. The type of bond breaker used shall be as recommended by the coating manufacturer. The values stated in SI units are to be regarded as the standard.
language	English
title	AASHTO M 254	num
title	Standard Specification for Corrosion-Resistant Coated Dowel Bars	en
type	standard
page	5
status	Active
tree	AASHTO - American Association of State Highway and Transportation Officials:;2015
contenttype	fulltext