IEEE 367

Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault

contributor author	IEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned	2017-09-04T17:33:40Z
date available	2017-09-04T17:33:40Z
date copyright	03/29/2012
date issued	2012
identifier other	DDFMVEAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/156533
description abstract	This recommended practice provides guidance for the calculation of power station GPR and LI voltages, as well as guidance for their appropriate reduction from worst-case values for use in metallic telecommunication protection design. Information is also included for the determination of the following: a) The fault current and the earth return current. (The probability, waveform, and duration of these currents and the impedance to remote earthing points used in these GPR and LI calculations as well as the effective X/R ratio are discussed.) b) The zone of influence (ZOI) of the power station GPR. c) The calculation of the inducing currents, the mutual impedance between power and metallic telecommunication facilities, and shield factors. d) The channel time requirements for metallic telecommunication facilities where noninterruptible channels are required for protective relaying.
language	English
title	IEEE 367	num
title	Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault	en
type	standard
page	168
status	Active
tree	IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
contenttype	fulltext