درباره ما
IEEE 367
Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
Year: 2012
Abstract: This recommended practice provides guidance for the calculation of power station GPR and LI voltages, as well as guidance for their appropriate reduction from worst-case values for use in metallic telecommunication protection design. Information is also included for the determination of the following:
a) The fault current and the earth return current. (The probability, waveform, and duration of these currents and the impedance to remote earthing points used in these GPR and LI calculations as well as the effective X/R ratio are discussed.)
b) The zone of influence (ZOI) of the power station GPR.
c) The calculation of the inducing currents, the mutual impedance between power and metallic telecommunication facilities, and shield factors.
d) The channel time requirements for metallic telecommunication facilities where noninterruptible channels are required for protective relaying.
a) The fault current and the earth return current. (The probability, waveform, and duration of these currents and the impedance to remote earthing points used in these GPR and LI calculations as well as the effective X/R ratio are discussed.)
b) The zone of influence (ZOI) of the power station GPR.
c) The calculation of the inducing currents, the mutual impedance between power and metallic telecommunication facilities, and shield factors.
d) The channel time requirements for metallic telecommunication facilities where noninterruptible channels are required for protective relaying.
Show full item record
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T17:33:40Z | |
| date available | 2017-09-04T17:33:40Z | |
| date copyright | 03/29/2012 | |
| date issued | 2012 | |
| identifier other | DDFMVEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/156533 | |
| description abstract | This recommended practice provides guidance for the calculation of power station GPR and LI voltages, as well as guidance for their appropriate reduction from worst-case values for use in metallic telecommunication protection design. Information is also included for the determination of the following: a) The fault current and the earth return current. (The probability, waveform, and duration of these currents and the impedance to remote earthing points used in these GPR and LI calculations as well as the effective X/R ratio are discussed.) b) The zone of influence (ZOI) of the power station GPR. c) The calculation of the inducing currents, the mutual impedance between power and metallic telecommunication facilities, and shield factors. d) The channel time requirements for metallic telecommunication facilities where noninterruptible channels are required for protective relaying. | |
| language | English | |
| title | IEEE 367 | num |
| title | Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault | en |
| type | standard | |
| page | 168 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012 | |
| contenttype | fulltext |