درباره ما
API SPEC 12P
Specification for Fiberglass Reinforced Plastic Tanks - Third Edition; Effective Date: April 1,2009
Organization:
API - American Petroleum Institute
Year: 2008
Abstract: General
This specification covers material, design, fabrication, and testing requirements for fiberglass reinforced plastic (FRP) tanks. Only shop-fabricated, vertical, cylindrical tanks are covered. Tanks covered by this specification are intended for above ground and atmospheric pressure service. Unsupported cone bottom tanks are outside the scope of this specification.
This specification is designed to provide the petroleum industry with various standard sizes of FRP tanks. Because of the versatility of FRP tanks, the user shall be responsible for determining the suitability of FRP tanks for the intended service.
The consequences of exposing the FRP tank to high temperatures created by exposure fires should be considered. This material loses strength as the temperature increases. FRP tanks should be suitably protected against fire exposure or so located that any spills resulting from the failure of these materials could not unduly expose persons, buildings, structures or other equipment to the above.
Compliance
The manufacturer is responsible for complying with all of the provisions of this specification.
This specification covers material, design, fabrication, and testing requirements for fiberglass reinforced plastic (FRP) tanks. Only shop-fabricated, vertical, cylindrical tanks are covered. Tanks covered by this specification are intended for above ground and atmospheric pressure service. Unsupported cone bottom tanks are outside the scope of this specification.
This specification is designed to provide the petroleum industry with various standard sizes of FRP tanks. Because of the versatility of FRP tanks, the user shall be responsible for determining the suitability of FRP tanks for the intended service.
The consequences of exposing the FRP tank to high temperatures created by exposure fires should be considered. This material loses strength as the temperature increases. FRP tanks should be suitably protected against fire exposure or so located that any spills resulting from the failure of these materials could not unduly expose persons, buildings, structures or other equipment to the above.
Compliance
The manufacturer is responsible for complying with all of the provisions of this specification.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T17:34:06Z | |
| date available | 2017-09-04T17:34:06Z | |
| date copyright | 2008.10.01 | |
| date issued | 2008 | |
| identifier other | DEJJHCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/156959 | |
| description abstract | General This specification covers material, design, fabrication, and testing requirements for fiberglass reinforced plastic (FRP) tanks. Only shop-fabricated, vertical, cylindrical tanks are covered. Tanks covered by this specification are intended for above ground and atmospheric pressure service. Unsupported cone bottom tanks are outside the scope of this specification. This specification is designed to provide the petroleum industry with various standard sizes of FRP tanks. Because of the versatility of FRP tanks, the user shall be responsible for determining the suitability of FRP tanks for the intended service. The consequences of exposing the FRP tank to high temperatures created by exposure fires should be considered. This material loses strength as the temperature increases. FRP tanks should be suitably protected against fire exposure or so located that any spills resulting from the failure of these materials could not unduly expose persons, buildings, structures or other equipment to the above. Compliance The manufacturer is responsible for complying with all of the provisions of this specification. | |
| language | English | |
| title | API SPEC 12P | num |
| title | Specification for Fiberglass Reinforced Plastic Tanks - Third Edition; Effective Date: April 1,2009 | en |
| type | standard | |
| page | 38 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2008 | |
| contenttype | fulltext |