CSA CSA 6.19-01
Residential carbon monoxide alarming devices - First Edition; General Instruction No. 1: March 2001
Organization:
CSA - CSA Group
Year: 2011
Abstract: The provisions of this Standard apply to electrically operated single- and multiple-station carbon monoxide (CO) alarming devices, hereafter referred to as devices, intended for protection in ordinary indoor residential areas. These areas include, but are not limited to, dwelling units, recreational vehicles and mobile homes, unconditioned areas, health care facilities, nursing homes, or other institutional residencies. The devices are not intended for industrial and commercial applications.
These provisions apply to devices that are intended to protect against acute effects of exposure to CO. Devices are intended to alarm at CO levels below those which could cause a loss of ability to react to the dangers of CO exposure.
Devices are not intended to alarm during long-term, low-level CO exposures or slightly higher shortterm transient CO exposure.
These provisions also apply to remote accessories that may be connected to or are intended to be employed with a single- or multiple-station CO alarm.
If a value for a measurement is followed by a value in other units in parenthesis, the second value may be only approximate. The first stated value is the requirement.
These provisions apply to devices that are intended to protect against acute effects of exposure to CO. Devices are intended to alarm at CO levels below those which could cause a loss of ability to react to the dangers of CO exposure.
Devices are not intended to alarm during long-term, low-level CO exposures or slightly higher shortterm transient CO exposure.
These provisions also apply to remote accessories that may be connected to or are intended to be employed with a single- or multiple-station CO alarm.
If a value for a measurement is followed by a value in other units in parenthesis, the second value may be only approximate. The first stated value is the requirement.
Collections
:
-
Statistics
CSA CSA 6.19-01
Show full item record
| contributor author | CSA - CSA Group | |
| date accessioned | 2017-09-04T17:34:39Z | |
| date available | 2017-09-04T17:34:39Z | |
| date copyright | 2001.03.01 (R 2011) | |
| date issued | 2011 | |
| identifier other | DFWCDFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/157532 | |
| description abstract | The provisions of this Standard apply to electrically operated single- and multiple-station carbon monoxide (CO) alarming devices, hereafter referred to as devices, intended for protection in ordinary indoor residential areas. These areas include, but are not limited to, dwelling units, recreational vehicles and mobile homes, unconditioned areas, health care facilities, nursing homes, or other institutional residencies. The devices are not intended for industrial and commercial applications. These provisions apply to devices that are intended to protect against acute effects of exposure to CO. Devices are intended to alarm at CO levels below those which could cause a loss of ability to react to the dangers of CO exposure. Devices are not intended to alarm during long-term, low-level CO exposures or slightly higher shortterm transient CO exposure. These provisions also apply to remote accessories that may be connected to or are intended to be employed with a single- or multiple-station CO alarm. If a value for a measurement is followed by a value in other units in parenthesis, the second value may be only approximate. The first stated value is the requirement. | |
| language | English | |
| title | CSA CSA 6.19-01 | num |
| title | Residential carbon monoxide alarming devices - First Edition; General Instruction No. 1: March 2001 | en |
| type | standard | |
| page | 132 | |
| status | Active | |
| tree | CSA - CSA Group:;2011 | |
| contenttype | fulltext |

درباره ما