Show simple item record

MIL-M-24350B

MONITORS, REVERSE POWER AND POWER-SENSING, ELECTRICAL POWER (NAVAL SHIPBOARD USE) (METRIC)

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T17:37:39Z
date available2017-09-04T17:37:39Z
date copyright07/31/1989
date issued1989
identifier otherDNSLDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/160550
description abstractThis specification covers the general requirements for reverse power monitors and power-sensing monitors for protection of electrical power generation equipment (see 6.1).
The type designation of reverse power and power-sensing monitors shall be in the following form (see 6.2). CHART Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 20362-5101 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The reverse power monitor, when mounted in a generator control unit, shall sense a power reversal on a 60 Hz, 3-phase generator, and cause the tripping of the circuit breaker for the motorized generator to prevent damage to its prime mover. The power-sensing monitor shall sense a high power demand and provide two stages of load shedding by tripping selected load circuit breakers.
languageEnglish
titleMIL-M-24350Bnum
titleMONITORS, REVERSE POWER AND POWER-SENSING, ELECTRICAL POWER (NAVAL SHIPBOARD USE) (METRIC)en
typestandard
page20
statusActive
treeDLA - CC - DLA Land and Maritime:;1989
contenttypefulltext
subject keywordsGenerator control
subject keywordsLoad shedding
subject keywordsSwitchgear
subject keywordsTrip point


Files in this item

Thumbnail
Name:
DNSLDAAAAAAAAAAA.pdf
Size:
1.072Mb
Format:
PDF
View/Open

This item appears in the following Collection(s)

Show simple item record