MIL-M-24350B

Abstract

This specification covers the general requirements for reverse power monitors and power-sensing monitors for protection of electrical power generation equipment (see <a>6.1</a>). <br>The type designation of reverse power and power-sensing monitors shall be in the following form (see <a>6.2</a>). <a><img alt="CHART" /></a> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 20362-5101 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <b><u>Intended Use:</u></b> The reverse power monitor, when mounted in a generator control unit, shall sense a power reversal on a 60 Hz, 3-phase generator, and cause the tripping of the circuit breaker for the motorized generator to prevent damage to its prime mover. The power-sensing monitor shall sense a high power demand and provide two stages of load shedding by tripping selected load circuit breakers. <br>