درباره ما
API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 1-Introduction to the Determination of the Volume of Displacement and Tank Provers - FIRST EDITION
Organization:
API - American Petroleum Institute
Year: 2015
Abstract: Chapter 4, Section 9 covers all the procedures required to determine the field data necessary to calculate a Base Prover Volume (BPV) of either Displacement Provers or Volumetric Tank Provers. It will enable the user to perform all the activities necessary to prepare the prover, conduct calibration runs, and record all the required data necessary to calculate the base volumes of displacement and tank provers. Evaluation of the results and troubleshooting of many calibration problems are also discussed.
This component, Chapter 4, Section 9, Part 1, is the Introduction, and contains all those relevant aspects that are general in nature, yet essential and applicable to all the different methods of calibration. Therefore, each subsequent part, which describes a specific method of prover calibration, must be used with Part 1. Together the two parts contain all the information that is essential to complete the required method of calibration.
Detailed calculation procedures are not included in this standard. For the complete details of the calculations for each calibration method, refer to the appropriate parts of the latest edition of the API Manual of Petroleum Measurement Standards, Chapter 12, Section 2.
This component, Chapter 4, Section 9, Part 1, is the Introduction, and contains all those relevant aspects that are general in nature, yet essential and applicable to all the different methods of calibration. Therefore, each subsequent part, which describes a specific method of prover calibration, must be used with Part 1. Together the two parts contain all the information that is essential to complete the required method of calibration.
Detailed calculation procedures are not included in this standard. For the complete details of the calculations for each calibration method, refer to the appropriate parts of the latest edition of the API Manual of Petroleum Measurement Standards, Chapter 12, Section 2.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T17:37:42Z | |
| date available | 2017-09-04T17:37:42Z | |
| date copyright | 2005.10.01 (R 2015) | |
| date issued | 2015 | |
| identifier other | DNXVLFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/160617 | |
| description abstract | Chapter 4, Section 9 covers all the procedures required to determine the field data necessary to calculate a Base Prover Volume (BPV) of either Displacement Provers or Volumetric Tank Provers. It will enable the user to perform all the activities necessary to prepare the prover, conduct calibration runs, and record all the required data necessary to calculate the base volumes of displacement and tank provers. Evaluation of the results and troubleshooting of many calibration problems are also discussed. This component, Chapter 4, Section 9, Part 1, is the Introduction, and contains all those relevant aspects that are general in nature, yet essential and applicable to all the different methods of calibration. Therefore, each subsequent part, which describes a specific method of prover calibration, must be used with Part 1. Together the two parts contain all the information that is essential to complete the required method of calibration. Detailed calculation procedures are not included in this standard. For the complete details of the calculations for each calibration method, refer to the appropriate parts of the latest edition of the API Manual of Petroleum Measurement Standards, Chapter 12, Section 2. | |
| language | English | |
| title | API MPMS 4.9.1 | num |
| title | Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 1-Introduction to the Determination of the Volume of Displacement and Tank Provers - FIRST EDITION | en |
| type | standard | |
| page | 30 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2015 | |
| contenttype | fulltext |