درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1301-1320 of 39933
-
Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
Abstract: 4.1 Properly sized and fitted body armor enhances the safety and performance of the wearer by providing protection while not restricting movement. Having body armor that fits well begins with appropriate and accurate ... -
Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel
Abstract: 5.1 This guide is meant to be used with and applied to individual trained descriptive assessors. 5.2 The procedures recommended in this guide can be used by the panel leader to periodically appraise the performance of ... -
Standard Test Methods for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
Abstract: 5.1 These test methods establish procedures for the analysis and identification of organic compounds in smokeless powders by GC-MS or FTIR. 5.2 FTIR is used to identify nitrocellulose in all smokeless powders, nitroguanidine ... -
Standard Practice for Identification and Classification of Smokeless Powder
Abstract: 5.1 This practice describes criteria for the analysis, identification, and classification of smokeless powders which can be used as an explosive for improvised explosive devices or as a propellant, such as for small arms ... -
Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
Abstract: 5.1 This test method is used to identify FAMEs and petroleum distillates found in biodiesel products. Derivatization is not necessary to identify FAMEs. 5.1.1 The identification of biodiesel in debris and liquid samples ... -
Standard Specification for Copper and Copper Alloy Clad Steel Plate
Abstract: This specification covers plates made of carbon steel or low-alloy steel base, to which a layer of copper or copper-base alloy cladding is integrally and continuously bonded on one or both sides. The material is generally ... -
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
Abstract: This specification covers steel castings, martensitic stainless steel and alloys steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive ... -
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
Abstract: This specification covers the chemical, mechanical, and dimensional requirements, and associated test methods for steel rivets for use in boilers and pressure vessels, and steel bars for use in the manufacture of such ... -
Standard Practice for Soil Exploration and Sampling by Auger Borings
Abstract: 4.1 Auger borings often provide the simplest method of soil exploration and sampling. They may be used for collecting disturbed soil samples and are a valuable method for determining groundwater levels and for indicating ... -
Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
Abstract: 4.1 Determination of the color of petroleum products is used mainly for manufacturing control purposes and is an important quality characteristic, since color is readily observed by the user of the product. In some cases, ... -
Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
Abstract: 2.1 All five of the test methods described will produce polish films from emulsion floor polishes which can be used for various performance tests. The choice of test method is left up to the individual laboratory. -
Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
Abstract: 5.1 This test method provides an indication of the relative smoke producing properties of kerosenes and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon type composition of such ... -
Standard Test Method for Corrosion Test for Engine Coolants in Glassware
Abstract: 5.1 This test method will generally distinguish between coolants that are definitely deleterious from the corrosion standpoint and those that are suitable for further evaluation. However, the results of this test method ... -
Standard Test Method for Needle Penetration of Petroleum Waxes
Abstract: 5.1 Petroleum waxes differ in hardness. Needle penetration is a measurement of hardness. Hardness may have a significant effect upon other physical properties. -
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
Abstract: 5.1 Accurate determination of the density, relative density (specific gravity), or API gravity of petroleum and its products is necessary for the conversion of measured volumes to volumes or masses, or both, at the standard ... -
Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
Abstract: 4.1 This is a revision of the method for measuring rosin acids content combines the three major ways of determining the rosin acids content of pine chemicals products into a single method. 4.1.1 For materials containing ... -
Standard Test Method for Nonrepetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements
Abstract: 5.1 Field, in-place nonrepetitive static plate load tests are used for the evaluation and design of pavement structures. Nonrepetitive static plate load tests are performed on soils and unbound base and subbase materials ... -
Standard Specification for Reagent Water
Abstract: This specification describes the required characteristics of reagent waters. Four types of waters have been specified, with three additional grades that can be applied to the four types. The grade specifications specifically ... -
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
Abstract: 5.1 This test method is used for the determination of the distillation characteristics of petroleum products, biodiesel, and fractions that may decompose if distilled at atmospheric pressure. This boiling range, obtained ... -
Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
Abstract: This specification covers woven cotton fabrics saturated with either asphalt or coal-tar intended for use with asphalt based plying cement (such as mopping asphalts or appropriate solvent bearing asphaltic compounds), ...