درباره ما
Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D1322-24
Organization:
ASTM - ASTM International
Year: 2024
Abstract: 5.1 This test method provides an indication of the relative smoke producing properties of kerosenes and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon type composition of such fuels. Generally the more aromatic the fuel the smokier the flame. A high smoke point indicates a fuel of low smoke producing tendency. 5.2 The smoke point is quantitatively related to the potential radiant heat transfer from the combustion products of the fuel. Because radiant heat transfer exerts a strong influence on the metal temperature of combustor liners and other hot section parts of gas turbines, the smoke point provides a basis for correlation of fuel characteristics with the life of these components.
Collections
:
-
Statistics
Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2025-09-30T18:08:37Z | |
| date available | 2025-09-30T18:08:37Z | |
| date copyright | 2024 | |
| date issued | 2024 | |
| identifier other | d1322-24.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/342697 | |
| description abstract | 5.1 This test method provides an indication of the relative smoke producing properties of kerosenes and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon type composition of such fuels. Generally the more aromatic the fuel the smokier the flame. A high smoke point indicates a fuel of low smoke producing tendency. 5.2 The smoke point is quantitatively related to the potential radiant heat transfer from the combustion products of the fuel. Because radiant heat transfer exerts a strong influence on the metal temperature of combustor liners and other hot section parts of gas turbines, the smoke point provides a basis for correlation of fuel characteristics with the life of these components. | |
| language | English | |
| title | Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel | en |
| title | ASTM D1322-24 | num |
| type | standard | |
| status | Historical | |
| tree | ASTM - ASTM International:;2024 | |
| contenttype | fulltext | |
| scope | 1.1 This test method covers two procedures for determination of the smoke point of kerosene and aviation turbine fuel, a manual procedure and an automated procedure, which give results with different precision. 1.2 The automated procedure is the referee procedure. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/D1322-24 |