درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1541-1560 of 39933
-
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Abstract: This specification covers the installation and erection requirements for load bearing (transverse and axial) steel studs and related accessories. Materials requirements for framing members, zinc-rich paint, steel drill ... -
Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
Abstract: 4.1 This practice is specifically intended to establish proper manufacture and surface preparation of gray iron castings for successful application of porcelain enamel. 4.2 Casting composition and proper removal of ... -
Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
Abstract: 4.1 This guide provides a method to determine the thermal performance of low-density blanket-type insulation. It may be used for the purposes of quality assurance, certification, or research. 4.2 The thermal resistance ... -
Standard Specification for Nonstructural Steel Framing Members
Abstract: This specification covers nonstructural steel framing members in interior construction assemblies. Members shall be manufactured from steel and shall have a protective coating. Studs and rigid furring channels shall have ... -
Standard Test Method for Volume Resistivity of Glass
Abstract: 4.1 This experimental procedure yields meaningful data for the volume resistivity of glass. It is designed to minimize space-charge, buildup polarization effects, and surface conductances. The temperature range is limited ... -
Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
Abstract: This specification covers mineral fiber blanket insulation and blanket-type pipe insulation (metal-mesh covered) (industrial type). Mineral fiber metal-mesh covered blanket shall be composed of rock, slag, or glass processed ... -
Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
Abstract: 3.1 This test method is recommended for quality control, acceptance testing; or it may help to develop or qualify a thermal spray operator's equipment and procedure or to aid in developing thermal spray coatings with ... -
Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
Abstract: 5.1 The results obtained from this test method are simply a measure of the degree of horizontal or vertical flow of single-component or multi-component sealants when applied to a set joint configuration at two pre-determined ... -
Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
Abstract: 4.1 This test method offers an alternate procedure to Test Method C336 for determining the annealing and strain points of glass. It is particularly recommended for glasses not adaptable to flame working. It also has the ... -
Standard Specification for Gypsum Veneer Plaster
Abstract: This specification covers calcined gypsum mixed at the mill with other ingredients to control working quality and setting time; specifically designed as a veneer plaster to be applied over gypsum base for veneer plasters, ... -
Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
Abstract: This specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at certain temperatures. The ... -
Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
Abstract: This specification pertains to quicklime and hydrated lime, either high calcium, dolomitic, or magnesium lime, for use in stabilization of soils. Quicklime and hydrated lime for soil stabilization shall conform to the ... -
Standard Specification for Chemical-Resistant Ceramic Tower Packings
Abstract: This specification covers fired chemical-resistant ceramic tower installation packings formed from naturally occurring clays or compounded bodies. The number of dumped pieces of cylindrical-type packing material should ... -
Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
Abstract: 5.1 This test method provides a means of establishing specular gloss limits for bright, semi-mat, and mat glazed surfaces. It is realized that specular gloss measurements do not always correlate well with visual rankings ... -
Standard Specification for Chemical Admixtures for Concrete
Abstract: This specification covers the materials and the test methods for use in chemical admixtures to be added to hydraulic-cement concrete mixtures in the field. The seven types of admixtures are indicated as follows: Type A -
Standard Test Methods for Physical Testing of Gypsum Panel Products
Abstract: These test methods cover the physical testing of gypsum panel products. The test methos appear in the following order: (1) flexural strength (Method A); (2) core, end, and edge hardness (Method A); (3) nail pull resistance ... -
Standard Test Method for Measuring Warpage of Ceramic Tile
Abstract: 5.1 This test method provides a means for determining whether or not a lot of ceramic tile meets the warpage requirements that may appear in specifications to assure satisfactory tile installations. In accordance with this ... -
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
Abstract: 5.1 The parameters of the air-void system of hardened concrete determined by the procedures described in this test method are related to the susceptibility of the cement paste portion of the concrete to damage by freezing ... -
Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Abstract: This test method covers hydraulic cement fineness tests performed using a sieve. The sieve frame should be made of a circular metal matching the specified dimensions, fitted with either a stainless steel woven-wire sieve ... -
Standard Specification for Aggregates for Masonry Grout
Abstract: This specification covers aggregates used for masonry grout. Aggregates should consist of either natural or manufactured sand, used alone or in combination with course aggregates. The course aggregates should be made up ...