درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1861-1880 of 39933
-
Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
Abstract: 14.1 Twist Test—This test is designed to detect surface related issues such as flaking or cracking in the shell as well as core integrity of the wire related to elongation. Failures under the specified requirements could ... -
Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
Abstract: 4.1 This test method is intended for use in evaluating the binding to snowboard insert retention strength resulting from use. This test method may also be used to compare the durability of different materials and designs. ... -
Standard Specification for Cast Tool Steel
Abstract: This specification covers tool steel compositions appropriate for usable shapes cast by pouring directly into suitable molds and for master heats for remelting and casting. Grades of the tool steel covered in this specification ... -
Standard Consumer Safety Specification for Baby Monitors
Abstract: This consumer safety specification addresses incidents associated with corded baby monitors that were identified by the U.S. Consumer Product Safety Commission (CPSC), including strangulations as a result of entanglement ... -
Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
Abstract: 5.1 This test method evaluates puncture resistance of protective clothing materials which may include: plastics or elastomeric films, coated fabrics, flexible materials, laminates, leathers, or textile materials. 5.1.1 This ... -
Standard Specification for Condition 1 Bicycle Forks
Abstract: This specification provides testing requirements for qualifying designs using production forks intended for use in Condition 1 per Classification F2043. It covers the compression load test, bending load test, impact ... -
Standard Test Method for Door Systems Subject to Airblast Loadings
Abstract: 5.1 This test method provides standardized procedures that must be followed to establish that a particular door assembly meets a defined damage category (Table 1). Test results can be used to specify a door assembly for a ... -
Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
Abstract: 4.1 This test method evaluates the ability of a non-combustible passive fire protection system installed on structural divisions on commercial ships to function after shock loading. 4.2 The shock loading is accomplished ... -
Standard Practice for Gasket Constants for Bolted Joint Design
Abstract: 5.1 This practice determines the room temperature gasket constants Gb and a for initial seating and Gs for operating conditions as related to the tightness behavior of pressurized bolted flanged connections. These constants ... -
Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
Abstract: 3.1 This test method offers a means to compare the barrel compression of softball and baseball bats. This test is not intended for wood or solid bats. -
Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
Abstract: 5.1 The freeze-down energy consumption and duration can be used to determine time and energy required for a freezer to be ready to serve when loaded with mix. 5.2 The minimum dispensing interval determination is used to ... -
Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems
Abstract: 5.1 The shedding of the coating from a vascular stent can alter its clinical safety and/or therapeutic benefit. Clinical performance (for example, drug elution) may be affected by particulate generation from the coated ... -
Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
Abstract: 5.1 The performance and quality of steam-treated materials depends upon the surface cleanliness of the material prior to steam treatment and the adequacy of the processing. Steam treatment can be used as a decorative ... -
Standard Test Method for Snowboard Step-in Bindings
Abstract: 4.1 This test method describes the steps required to evaluate a step-in snowboard binding system function. The test method consists of a series of laboratory tests that evaluate resistance to static and dynamic loading, ... -
Standard Guide for In-ground Concrete Skatepark
Abstract: This guide covers safety and performance guidelines pertaining to in-ground skatepark facilities built primarily out of concrete and other designed materials. Any concrete materials and other designed materials intended ... -
Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
Abstract: 5.1 This practice is a screening tool and should be used in conjunction with other more accurate real-time load-measuring techniques. 5.2 This practice covers the use of PIF, which is available in several load ranges. ... -
Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
Abstract: 4.1 The test results enable the comparison of A-weighted sound emission from central vacuum power units when tested under the condition of this test method. -
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
Abstract: 4.1 Materials and devices that function at least in part by adhering to living tissues are finding increasing use in surgical procedures either as adjuncts to sutures and staples, or as frank replacements for those devices ...