درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1841-1860 of 39933
-
Standard Test Method for Abrasion Resistance of Pipeline Coatings
Abstract: 5.1 This procedure defines a test method for comparing the relative resistance of pipeline coatings to abrasion. 5.2 Abrasion resistance may be used to specify optimum coating thickness of candidate materials both in ... -
Standard Test Method for Testing Fiber Rope Used in Water Sports
Abstract: 3.1 This test method provides a means of determining the breaking strength (breaking force) of rope. It is not intended to evaluate the data with regard to the quality of the rope. -
Standard Guide for Coating Characterization of Drug-Coated Balloons
Abstract: 5.1 The methods described herein allow for in vitro characterization of DCB drug coating attributes that, along with pre-clinical and clinical safety and effectiveness data, establish that the DCBs, with the characterized ... -
Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
Abstract: 5.1 Solvent cement bonder/installers shall follow all procedures to produce consistently strong and leak-free joints, either in shop operations or in the field. -
Standard Consumer Safety Specification for Infant Floor Seats
Abstract: This consumer safety specification establishes the performance requirements and test methods to ensure the satisfactory performance of infant floor seats, which may include a tray, toys, or a restraint system. It seeks to ... -
Standard Guide for Cybersecurity and Cyberattack Mitigation
Abstract: 5.1 To maintain the integrity of potentially vulnerable information systems while the vessel is at sea or in port, strategies and procedures can be used by every company, organization, and ship. Mitigating potential ... -
Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
Abstract: 5.1 Overview of Measurement System—Relative intensity measurements made by widefield epifluorescence microscopy are used as part of cell-based assays to quantify attributes such as the abundance of probe molecules (see ... -
Standard Practice for Compression versus Load Properties of Gasket Materials
Abstract: 5.1 The load versus thickness properties of a gasket material are an important factor with regard to the selection of a given material for use in a particular sealing application. Additionally, compression/load behavior ... -
Standard Terminology Relating to Refractories
Abstract: 3.1 This terminology ensures that terms peculiar to refractories are adequately defined so that other standards in which such terms are used can be understood and interpreted properly. 3.2 This terminology is useful to ... -
Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
Abstract: 4.1 The dynamic interaction between the athlete and the surface is significant to the performance and comfort of the athlete. Therefore, the ability of the surface to deform under load is important. Too high a vertical ... -
Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
Abstract: 5.1 Leaks in blister packs may affect product quality and such defects can arise from imperfections in the packaging material or bond between the sealed surfaces. 5.2 This method of leak testing is a useful tool as it ... -
Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
Abstract: This specification establishes the material, manufacturing, performance, and testing requirements for Metallic Press-Connect Fittings used in piping and tubing systems with a maximum allowable working pressure of 300 psi. ... -
Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
Abstract: This specification defines chemical, dimensional, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and alloy steel, in inch dimensions. Structural bolting assemblies are designated ... -
Standard Specification for Acrylic Molding Resins for Medical Implant Applications
Abstract: This specification covers requirements and corresponding test methods for acrylic resins supplied in virgin form (typically pellets, powder, or granules) for medical implant applications. The co-polymers are limited to ... -
Standard Test Method for Commercial Coffee Brewers
Abstract: 5.1 The measured maximum energy input rate is used to confirm that the coffee brewer is operating in accordance with its nameplate rating. 5.2 If applicable and accessible, the boiler or internal tank temperature is ...