درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2101-2120 of 39933
-
Standard Test Method for Fiber Shedding of Paint Roller Covers
Abstract: 3.1 Fibers that are released during painting can lead to a finish that is aesthetically unacceptable. -
Standard Test Method for Filling Material Shedding of Paint Brushes
Abstract: 3.1 During the application of coatings, paint brushes can exhibit shedding of filling material onto the coated surface. A measure of this shedding filling material will determine the paint brush’s ability to resist shedding ... -
Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
Abstract: 3.1 Measuring the total sulfur content of feedstock oil is often a necessary component in calculations for sulfur dioxide emissions. 3.2 The carbon black industry measures sulfur content of feedstock oils along with sulfur ... -
Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
Abstract: 5.1 Methanol content reflects the quality of glycerin for use as an engine coolant. The current specification for the maximum methanol content is 0.1 % weight to weight (w/w). -
Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
Abstract: 5.1 Soil-gas sampling results can be dependent on numerous factors both within and outside the control of the sampling personnel. Key variables are identified and briefly discussed below. Please see the documents listed ... -
Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
Abstract: 4.1 Measuring the total carbon content of feedstock oil is often a necessary component in calculations for carbon dioxide emissions, estimating yield of a process, or assessing product quality. 4.2 The carbon black industry ... -
Standard Specification for Silver-Coated Soft or Annealed Copper Wire
Abstract: This specification covers silver-coated, soft or annealed, round copper wire, intended for use in electrical equipment. The silver-coated wires are classified according to the total weight of the coated wires, namely; Class ... -
Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
Abstract: 6.1 This practice is for removing specimens from existing modified bitumen roof membranes for visual assessment and evaluation for abnormalities in the membrane. 6.2 This practice is not intended for roofs under construction. -
Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
Abstract: 5.1 Dialkyldithiocarbamates (DTCs), benzothiazoles, and thiurams are often used as vulcanization accelerators in NRL products. Zinc DTC accelerators are added either directly or are formed in situ during the vulcanization ... -
Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
Abstract: 5.1 The induction period may be used as an indication of the oxidation and storage stability of middle distillate fuel. 5.2 Compared to some other oxidation and storage stability test methods, this method uses a small ... -
Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
Abstract: 5.1 This test method is intended to evaluate whether sufficient salt (NaCl) has been retained by the hides or skins to slow down degradation by bacterial (enzymatic) action, and to slow down autolysis by inherent enzymatic ... -
Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
Abstract: 5.1 The induction period may be used as an indication of the oxidation and storage stability of spark ignition fuel. 5.2 Compared to some other oxidation and storage stability test methods, this test method uses a small ... -
Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
Abstract: 4.1 Although Test Method D4017 is widely used for the determination of water in paints and related materials, this method may overcome some of the variability found in the Karl Fischer method. 4.2 Control of water content ... -
Standard Guide for Determining the Transmission of Gases Through Geomembranes
Abstract: This guide discusses the relevancy of applicable test methods, including the materials and conditions involved, in obtaining the vapor transmission in geomembranes. This guide does not purport to critique barrier system ... -
Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
Abstract: 5.1 This test method assists in evaluating the effect of layout, typeface, type size, color, and background on the legibility of printed matter. 5.2 Previous research3 has shown that results are more significantly impacted ... -
Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
Abstract: This specification covers the properties necessary for thin film, unlined polymer gloves to be used in food preparation and food handling. It is also intended to serve as a referee and a guide to permit obtaining gloves ... -
Standard Specification for Hard-Drawn Copper-Clad Steel Wire
Abstract: This specification covers bare hard-drawn round copper-clad steel wire. The surface of the wire shall be smooth and free from imperfections not consistent with good commercial practice. The wire shall conform to the tensile ... -
Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners
Abstract: 5.1 In some situations, penetration through asphalt-based roofing or waterproofing materials by fasteners is a required part of the material installation process or occurs during installation of other system components. ...