درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2081-2100 of 39933
-
Standard Specification for Laboratory Glass Graduated Burets
Abstract: This specification covers requirements for glass burets of precision and general-purpose grades suitable for laboratory use. Burets are classified as: class A - precision grade buret, and class B - general purpose burets. ... -
Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
Abstract: 4.1 The purpose of this test method is to determine the amount of gangue, refractory, inert, etc. materials, that may adversely affect compacting tools and sintered properties of components formed from copper and iron ... -
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
Abstract: This specification covers the performance requirements for four types (Types IA, IB, IIA, and IIB) of general-purpose air ovens of the gravity-convection and forced-ventilation types ordinarily used in testing operations. ... -
Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)
Abstract: 5.1 The tackiness test is designed for quantifying how sticky or non-sticky a material is at a certain temperature. The test should be run at various temperatures expected in the field for tack coat materials. If the results ... -
Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts
Abstract: This specification covers gray iron castings exposed to elevated temperatures for non-pressure containing parts such as grate bars, stoker links, stoker parts, oil still furnace parts, firebox parts, ingot molds, glass ... -
Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
Abstract: 4.1 The presence of metals in PTA used for the production of polyester is undesirable because they may speed up or slow down the reaction and be impurities in the final product. 4.2 Determination of the metals in PTA is ... -
Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
Abstract: This specification covers nickel-coated, soft or annealed, round copper wire for use in electrical equipment. Five classes of wire are covered as follows: Class 2, Class 4, Class 7, Class 10, and Class 27. Properties like ... -
Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results
Abstract: 4.1 The long-term material strength of geosynthetic reinforcement material is a critical design parameter for many civil engineering projects including, but not limited to, reinforced wall structures and reinforced slopes. ... -
Standard Practice for Manufacturing Quality Control of Geotextiles
Abstract: 4.1 Geotextiles are to be properly manufactured in a manner consistent with a minimum level of quality control as determined by in-house testing of the final product. This practice sets forth the types of tests, the methods ... -
Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
Abstract: 5.1 This test method allows the simultaneous determination of total nitrogen and total phosphorous from one sample digestion step. 5.2 This test method measures oxidized ammonia and organic nitrogen (as nitrate) and soluble ... -
Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
Abstract: 5.1 This practice provides a standard method of testing damaged composite laminates which are too thin to be tested using typical anti-buckling fixtures, such as those used in Test Method D7137/D7137M. The laminate is first ... -
Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
Abstract: 4.1 The test method enables strength values for wood and other materials bonded with an adhesive under a range of controlled bonding temperature, time, and pressure conditions to be evaluated. Bond formation and subsequent ... -
Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
Abstract: 4.1 Geomembranes are used as barriers to prevent liquids from leaking from landfills, ponds, and other containments. For this purpose, it is desirable that the geomembrane have as little leakage as practical. 4.2 The ... -
Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
Abstract: 5.1 Coil-coated metals are subjected to a wide range of environmental stresses. Corrosion at cut edges, damage points, and fabricated areas can occur and lead to premature failure. Proper preparation and rating of test ... -
Standard Specification for Pig Tin
Abstract: 11.1 For the purpose of determining compliance with the specified limits for requirements of the properties listed in Table 1, an observed value or a calculated value shall be rounded as indicated in accordance with the ... -
Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
Abstract: 5.1 This test method is an extension of Test Method D5403. While Test Method D5403 specifies that a test specimen be cured by exposure to UV or EB as prescribed by the supplier of the material, most radiation curable ...