درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2301-2320 of 39933
-
Standard Practice for Analysis of Vegetable Tanning Materials—General
Abstract: 3.1 Vegetable tanning materials are natural products containing various substances of varying composition, concentration and quality. 3.2 The methods referenced are useful for analyzing and testing vegetable tanning ... -
Standard Guide for Evaluation of in vitro Release of Biomolecules from Biomaterials Scaffolds for TEMPs
Abstract: 4.1 European and U.S. Pharmacopeia provide test methods for measuring release of a drug analyte, and USP <1001> provides a method that is intended to be applicable to implanted products. However, the characterization of ... -
Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions
Abstract: 3.1 This standard is applicable to the calculation of stresses seen on a knee femoral component when loaded in a manner described in this test method. This method can be used to establish the worst-case size for a particular ... -
Standard Specification for Aircraft Handling Characteristics
Abstract: This specification covers airworthiness design criteria for aeroplane handling characteristics in flight and on ground and water. The applicant for a design approval shall seek the individual guidance of their respective ... -
Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
Abstract: This consumer safety specification covers the requirements and test methods to promote safe use of infant and infant/toddler rockers by both occupants and caregivers. It is intended to minimize the risk of injury or death ... -
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
Abstract: 4.1 Single-lap specimens are economical, practical, and easy to make. They are the most widely used specimens for development, evaluation, and comparative studies involving adhesives and bonded products, including manufacturing ... -
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement and Performance Requirements
Abstract: 5.1 This in vitro test method includes the use of cyclic forces to evaluate the fatigue strength of acetabular shells or monoblock acetabular devices used in THR. 5.2 Fracture or cracking of acetabular shells or monoblock ... -
Standard Specification for Design Loads and Conditions
Abstract: This specification covers airworthiness requirements for the design loads and conditions of small airplanes, and is applicable to small airplanes as defined in the F44 terminology standard. The applicant for a design ... -
Standard Specification for Ice Protection for General Aviation Aircraft
Abstract: This specification provides international standards for ice protection aspects of airworthiness and design for "general aviation" aircraft. The applicant for a design approval must seek the individual guidance of their ... -
Standard Specification for Aircraft Powerplant Control, Operation, and Indication
Abstract: This specification provides minimum requirements for the control, indication, and operational characteristics of propulsion systems. It was developed based on propulsion system installed on aeroplanes, but may be applicable ... -
Standard Specification for Aircraft Fuel Storage and Delivery
Abstract: This specification prescribes minimum requirements for the design and integration of Fuel/Energy Storage and Delivery system installations for aeroplanes and is applicable to aeroplanes as defined in the F44 terminology ... -
Standard Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)
Abstract: 4.1 This guide establishes a minimum standard for training of SAR personnel who conduct operations in an alpine environment. 4.1.1 Alpine Endorsed individuals are required to have, at a minimum, the knowledge, skills, and ... -
Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
Abstract: 4.1 This guide establishes a minimum standard for training of SAR personnel who conduct operations in mountainous terrain. 4.1.1 Mountain Endorsed individuals are required to have, at a minimum, the knowledge, skills, and ... -
Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
Abstract: This specification provides the testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding to ensure personnel safety. It is intended for use by all persons ... -
Standard Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
Abstract: 4.1 Under well-controlled conditions, the quantitative evaluation of morphological features of a cell population can be used to identify changes in cellular behavior or state. Cell morphology changes may be expected when, ...