درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2581-2600 of 39933
-
Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
Abstract: 5.1 This test method is intended for use with other standards that address the collection and preparation of samples (dusts by wipe, dried paint chips, and soils) that are obtained during the assessment or mitigation of ... -
Standard Test Methods for Length of Woven Fabric
Abstract: These test methods cover four options for measuring fabric length and are applicable to full rolls or bolts of materials. There are four approved options of measuring length as follows: option A - hand, option B - drum, ... -
Standard Practice for Determination of the Converted Fraction of Starch and Cellulosic Content From a Fuel Ethanol Production Facility
Abstract: 4.1 In 2014, the U.S. EPA published the final rules adding renewable fuel pathways under the RFS Program. The rules qualified kernel fiber as a cellulosic feedstock meeting the 60 % greenhouse gas (GHG) reduction and ... -
Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use
Abstract: 4.1 Purpose—This guide provides a process for reclamation of existing CCPs placed in active and inactive storage areas. The guide includes information on the following activities required for the safe and effective reclamation ... -
Standard Digital Reference Images for High-Strength Copper-Base and Nickel-Copper Alloy Castings
Abstract: 4.1 Reference images for high-strength copper-base and nickel-copper alloy castings are intended to be used as a guide to the recognition of common discontinuities and their differentiation both as to type and severity ... -
Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics
Abstract: 5.1 Plastic composite materials for use as deck boards, stair treads, guards or handrails are evaluated in accordance with Test Method E84 to comply with building or residential code requirements. This Practice describes ... -
Standard Guide for Contaminated Sediment Site Risk-Based Corrective Action—Selection and Application of Analytical Methods and Test Procedures
Abstract: 4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in sediment corrective action programs, including regulatory agencies, project sponsors, environmental consultants, toxicologists, risk assessors, ... -
Standard Guide on Sampling for Process Analytical Technology
Abstract: 4.1 Application of this guidance should enable PAT method developers to design and implement reliable PAT applications that avoid many common sources of error around sampling. Sampling is a key element of method and process ... -
Standard Guide for Forensic Engineering Expert Reports
Abstract: 5.1 This guide may be useful to forensic engineers, courts, jurists, attorneys, insurance adjusters, and clients of forensic engineers. Although this guide is directed to the practice of forensic engineering, its description ... -
Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building
Abstract: 5.1 This test method does not establish requirements for airtightness but provides means of assessing compliance with specified air-leakage rates established elsewhere. 5.2 This test method is used to determine the ... -
Standard Guide for Specifying Water Vapor Transmission Material Properties of Water-Resistive Barriers and Air Barriers
Abstract: 4.1 As the building industry shifts towards performance-based design, specification of material properties consistent with anticipated in-service conditions becomes paramount to the design process. When specifying water ... -
Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration
Abstract: 5.1 While pyrolysis bio-oils are comprised of a large variety of compounds and chemical functional groups, quantification of carbonyl groups is especially important. Carbonyls are known to be responsible for the instability ... -
Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
Abstract: 3.1 This guide may be the basis for either the buying authority or the consumer to prepare a specification for solvent-based floor polishes (liquid or paste). Specifications prepared under this guide are for products ... -
Standard Guide for Recognition and Derecognition of Environmental Liabilities
Abstract: 4.1 Use—this guide is intended for use on a voluntary basis for evaluating environmental liabilities, often with Guide E2137 for estimation and Guide E2173 for disclosure. The user may elect to apply this guide for any or ... -
Standard Test Method for Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
Abstract: 5.1 This test method is used to measure a specimen's material and shape memory effect properties in response to a uniaxial deformation and then cycling through a full thermal transformation to recover all or a portion of ... -
Standard Terminology Relating to Radiation Processing: Dosimetry and Applications
Abstract: 3.1 The purpose of this standard is to facilitate communication and promote common understanding within the professionals in radiation processing research and industry. 3.2 Unambiguous communication of concepts is crucial. ... -
Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
Abstract: 4.1 A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in single-family detached dwellings, individual units ... -
Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance
Abstract: 5.1 This test method establishes water immersion, drying, and cleaning procedures to be used when determining whether building materials noted in 1.1 are flood damage resistant for applications that comply with the National ...