درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2701-2720 of 39933
-
Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
Abstract: 5.1 This practice establishes the basic parameters for the application and control of the CR examination method. This practice is written so it can be specified on the engineering drawing, specification, or contract. ... -
Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked
Abstract: 4.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1. (A) For guideline purposes see 6.4.1.(B) Class in the colorfastness requirements is based on a numerical scale of 5 for negligible ... -
Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
Abstract: 4.1 This test method was developed for the determination of nitrogen trichloride in samples of carbon tetrachloride liquid taken from the compressor suction chiller bottoms of chlorine production plants and other places ... -
Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
Abstract: 4.1 Use—This guide is intended to reflect a reasonable baseline process for the completion of PCAs for use on a voluntary basis. No implication is intended that use of this guide be required to have conducted a PCA in a ... -
Standard Guide for Seismic Risk Assessment of Buildings
Abstract: 4.1 Uses—This guide is intended for use on a voluntary basis by parties such as lenders, loan servicers, insurers and equity investors in real estate (Users) who wish to estimate possible earthquake losses to buildings. ... -
Standard Specification for Shelter, Tactical, Expandable, Two-Side
Abstract: This specification covers a rigid wall, two-side expandable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels and meeting the International Organization for Standardization (ISO) cargo container ... -
Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
Abstract: 5.1 Solar reflectance and thermal emittance are important factors affecting surface and near-surface ambient air temperature. Surfaces with low solar reflectance absorb a high fraction of the incoming solar energy. A ... -
Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
Abstract: 5.1 The primary advantage of RUS is its ability of making numerous measurements in a single test. In addition, it can examine rough ground parts. It requires little sample preparation, no couplants, and generally will work ... -
Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
Abstract: 4.1 Cleaning provides well documented benefits in terms of creating cleaner, safer, and healthier surroundings by extracting harmful pollutants from the indoor environment (see Ref (3)). An improperly maintained indoor ... -
Standard Test Method for Fire-Resistive Joint Systems
Abstract: 5.1 This test method evaluates, under the specified test conditions: (1) the ability of a fire resistive joint system to undergo movement without reducing the fire rating of the adjacent fire separating elements and (2) ... -
Standard Specification for Shelter, Tactical, Expandable, One-Side
Abstract: This specification covers a rigid wall, one-side expandable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Design and construction requirements of the expandable shelter shall conform to the ... -
Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
Abstract: 4.1 The approach presented in this guide is a practical and streamlined process for determining the appropriateness of remediation by natural attenuation and implementing remediation by natural attenuation at a given ... -
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
Abstract: 4.1 This test method is designed to produce shear property data for the process control and specification of adhesives. This test method may also be useful for research and development of adhesives. 4.2 Lap shear properties ... -
Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
Abstract: 5.1 This test method is used for the determination of titanium in nickel alloy samples to check for compliance with compositional specifications. It is assumed that all who use the procedure will be trained analysts capable ... -
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
Abstract: 5.1 EMAT techniques show benefits and advantages over conventional piezoelectric ultrasonic techniques in special applications where flexibility in the type of wave mode generation and where no fluid coupling is desired. ... -
Standard Test Method for Determination of Reference Temperature, T
0 , for Ferritic Steels in the Transition Range Abstract: 5.1 Fracture toughness is expressed in terms of an elastic-plastic stress-intensity factor, KJc, that is derived from the J-integral calculated at fracture. 5.2 Ferritic steels are microscopically inhomogeneous with respect ... -
Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
Abstract: 5.1 Waste samples collected using this practice provide representative samples for analysis in a laboratory using the TCLP. 5.2 The TCLP is used to simulate the transfer of lead from buried lead-containing waste into the ... -
Standard Guide for Time-Intensity Evaluation of Sensory Attributes
Abstract: 5.1 The purpose of time-intensity measurements is to establish the pattern of development and decline of a particular sensory characteristic over time. TI evaluations are applicable when measurements at a single time point ... -
Standard Guide for Identification of Mixed Lots of Metals
Abstract: 4.1 Equipment and procedures described in this guide are comparative methods and are intended for identification or segregation, or both, of pieces or lots of metals that were mixed or lost their identity during certain ... -
Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
Abstract: 4.1 Flash X-ray facilities provide intense bremsstrahlung radiation environments, usually in a single sub-microsecond pulse, which often fluctuates in amplitude, shape, and spectrum from shot to shot. Therefore, appropriate ...