درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 3401-3420 of 39933
-
Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
Abstract: 3.1 These test methods are designed to broaden the scope of the earlier editions of the test method by the inclusion of tall oil and tall oil derived products as test materials and is referenced in Test Methods D803. ... -
Standard Test Method for Aldehydes in Styrene Monomer
Abstract: 4.1 This test method is suitable for determining the quantity of aldehydes, both for quality control and quality assurance of the product. -
Standard Test Method for Thermal Stability of Hydraulic Oils
Abstract: 5.1 Thermal stability characterizes physical and chemical property changes which may adversely affect an oil's lubricating performance. This test method evaluates the thermal stability of a hydraulic oil in the presence ... -
Standard Practice for Preparing Coal Samples for Analysis
Abstract: 5.1 Other standards are used to collect the gross sample: Practice D2234/D2234M allows for one division of the gross sample before crushing. The mass and top size of the gross or divided sample collected by using these ... -
Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
Abstract: 5.1 This test method allows for the measurement of the torque retention properties of container/continuous thread closure systems of various designs, materials, manufacture, and is suitable for packaging development and ... -
Standard Test Method for Print Resistance of Architectural Paints
Abstract: 5.1 The ability of a coating to resist printing is important because its appearance is adversely affected if the smoothness of the coating film is altered by contact with another surface, particularly one with a texture. ... -
Standard Test Method for Determining Filter Blocking Tendency
Abstract: 5.1 This test method is intended for use in evaluating the cleanliness of middle distillate fuels, and biodiesel and biodiesel blends for specifications and quality control purposes. 5.2 The filter media specified in the ... -
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
Abstract: 5.1 This test method provides a measure of the dimensional stability and integrity of the coated edge of various composite wood products under accelerated moisture stress. It is widely used as an indicator or predictor of ... -
Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
Abstract: 4.1 The procedures described in this practice are intended to be used to establish allowable stress and modulus of elasticity values for solid sawn, visually graded dimension lumber from In-Grade type test data. These ... -
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
Abstract: 4.1 Measurements of frictional properties on a film or sheeting are made by either sliding the film or sheeting over itself or over another substance. The coefficients of friction are related to the slip properties of ... -
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
Abstract: 4.1 These test methods provide useful indexes of performance of plastic materials such as powders and granules with respect to their handling in packaging and fabrication. 4.2 Apparent density is a measure of the fluffiness ... -
Standard Practice for Analysis of Gaseous Fuels by Gas Chromatography
Abstract: 5.1 The information about the chemical composition can be used to calculate physical properties of the gas, such as heating (calorific) value and relative density. Combustion characteristics, products of combustion, toxicity, ... -
Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
Abstract: This specification covers the testing and physical requirements of two types of coal-tar pitch suitable for use in the construction of built-up roofing, dampproofing, and membrane waterproofing systems. The coal-tar pitch ... -
Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
Abstract: 5.1 The test method generally will distinguish coolants that have a tendency to foam excessively from those that are suitable for further evaluation to determine performance in actual service. Note 1: In use, the foaming ... -
Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
Abstract: 5.1 The presence of partial discharges (corona) at operating voltage in an insulation system has the potential to result in a significant reduction in the life of the insulating material. Some materials are more susceptible ... -
Standard Test Method for Fusibility of Coal and Coke Ash
Abstract: 5.1 The design of most coal combustion and coal conversion equipment anticipates that the ash either remain solid or assume some degree of fluidity, depending on the particular design. Ash fusibility temperatures help ... -
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
Abstract: 5.1 This test method for naphthalene hydrocarbons is one of a group of tests used to assess the combustion characteristics of aviation turbine fuels of the kerosene boiling range. The naphthalene hydrocarbon content is ... -
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
Abstract: 4.1 This test method is used for measuring the relative abilities of metal preservatives to prevent the rusting of steel panels under conditions of high humidity. It should not be relied upon to predict the effectiveness ... -
Standard Test Method for Oil Separation from Lubricating Grease During Storage
Abstract: 5.1 When a lubricating grease separates oil, the remaining composition increases in consistency. This can affect the ability of the product to function as designed. 5.2 It has been found that the results of this test ... -
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
Abstract: 5.1 The suitability of a dispersion resin for any given application is dependent upon its viscosity characteristics. 5.2 The extrusion viscosity defines the flow behavior of a plastisol or organosol under high shear. This ...