درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 3421-3440 of 39933
-
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
Abstract: 5.1 The suitability of a dispersion resin for any given application process is dependent upon its viscosity characteristics. 5.2 The viscosity defines the flow behavior of a plastisol or organosol under low shear. This ... -
Standard Test Methods for Film-Insulated Magnet Wire
Abstract: 7.1 Bond strength values obtained by flexural tests provide information with regard to the bond strength of a particular self-bonding outer coating in combination with a particular round film-insulated magnet wire when ... -
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
Abstract: 4.1 Test Methods A and B are used to establish the weight of the dart when estimated statistically 50 % of the specimens fail under the conditions specified. Data obtained by one test method cannot be compared directly ... -
Standard Specification for Aviation Turbine Fuels
Abstract: This specification covers purchases of aviation turbine fuel under contract and is intended primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for reciprocating aviation ... -
Standard Test Method for Water in Phenol and Related Materials by the Karl Fischer Reagent Method
Abstract: 5.1 This test method is particularly useful for determining small amounts of water in hygroscopic materials. This test method is suitable for setting specifications on materials referenced in the scope. It may also be used ... -
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
Abstract: 4.1 This method provides a means of evaluating and comparing basic corrosion performance of the substrate, pretreatment, or coating system, or combination thereof, after exposure to corrosive environments. -
Standard Test Method for Active Sulfur in Cutting Oils
Abstract: 5.1 This test method measures the quantity of sulfur available to react with metallic surfaces to form solid lubricating aids at the temperature of the test. Rates of reaction are metal type, temperature, and time dependent. -
Standard Test Method for Carbon Black—Iodine Adsorption Number
Abstract: 4.1 The iodine adsorption number is useful in characterizing carbon blacks. It is related to the surface area of carbon blacks and is generally in agreement with nitrogen surface area. The presence of volatiles, surface ... -
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
Abstract: 5.1 This test method is used to determine the density and water content of compacted soils placed during the construction of earth embankments, road fill, and structural backfill. It often is used as a basis of acceptance ... -
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
Abstract: 5.1 The data obtained by this test method are useful for establishing stress versus failure time relationships in a controlled environment from which the hydrostatic design basis for plastic pipe materials can be computed. ... -
Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
Abstract: 5.1 These test methods are designed to broaden the scope of the previous edition of these test methods by the inclusion of tall oil as a test material. Test Methods D803 currently includes methods for the determination of ... -
Standard Test Methods for Carbon Black—Heating Loss
Abstract: 4.1 In addition to determining the heating loss (primarily moisture content) of carbon black, these drying conditions are used to prepare samples prior to performing other carbon black tests. 4.2 When larger samples are ... -
Standard Specification for Coal-Tar Saturated Organic Felt Used in Roofing and Waterproofing
Abstract: This specification covers coal-tar-saturated organic felt intended to be used with coal-tar pitches conforming to the appropriate requirements in the construction of built-up roofs and in the construction of waterproofing ... -
Standard Test Method for Torsion Testing of Wire
Abstract: 4.1 The complex stress and strain conditions that occur in the sample during the torsion test are sensitive to minor variations in materials, making the torsion test a useful tool in assessing wire ductility under torsional ... -
Standard Specification for Automotive Gray Iron Castings
Abstract: This specification covers gray iron castings for products of the automobile, truck, tractor and allied industries. The materials shall be classified into eight grades (G1800, G2500, G3000, G3500, G4000, G2500a, G3500b and ... -
Standard Practice for Sampling and Handling Bisphenol A
(4,4′ -Isopropylidinediphenol) Abstract: 3.1 This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program ... -
Standard Practice for Sampling Fish with Rotenone
Abstract: This practice covers determination of the quantitative and qualitative species composition of fish in a specified area. The successful use of this technique is dependent on: (1) preventing fish from escaping the sample ... -
Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
Abstract: 5.1 The guide can be used to compare anti-redeposition performance of products; however, there is no confirmed basis for correlation of this controlled laboratory technique with consumers’ ranking of anti-redeposition performance.