درباره ما
Browsing ABMA - American Bearing Manufacturers Association by Issue Date
Now showing items 1-20 of 76
-
ABMA 8.1
Abstract: Mounting accessories covered in this standard are used for the location or fixing of ball and roller bearings to the shaft of a machine or mechanism. The purpose of the standard is to establish dimensions and minimum ... -
ABMA 13
Abstract: Purpose. Under certain operating conditions, vibration in rotating rolling bearings can be of importance as an operating characteristic of such bearings. For this reason, the measurement of vibration emitted ... -
ABMA 22.2
Abstract: General. This standard for spherical bearings, joint type (without rolling elements) has been established for the purpose of defining the characteristics of these bearings such as boundary dimensions, ... -
ABMA 23.2
Abstract: This standard for thrust bearings of the tapered roller type of inch design covers:
Bearing Number and Type Identity
Symbols and Nomenclature
Boundary Dimensions
Tolerances
Mounting Dimensions
All ... -
ABMA 21.2
Abstract: This standard for inch thrust needle roller and cage assemblies and thrust washers covers:
Identification Code
Symbols and Nomenclature
Boundary Dimensions
Tolerances
Mounting Practice
All thrust ... -
ABMA 21.1
Abstract: This standard for metric thrust needle roller and cage assemblies and thrust washers includes:
Identification Code
Symbols and Nomenclature
Boundary Dimensions
Tolerances
Mounting Practice
All thrust ... -
ABMA 24.1
Abstract: This standard for thrust bearings of ball, cylindrical roller and spherical roller types of metric design covers:
Identification Code
Symbols and Nomenclature
Boundary Dimensions
Tolerances
Mounting ... -
ABMA 24.2
Abstract: This standard for inch design thrust bearings of ball and cylindrical roller types covers:
Identification Code
Symbols and Nomenclature
Boundary Dimensions
Tolerance
Mounting Dimensions
All ... -
ABMA 25.2
Abstract: This Standard gives the general plan for boundary dimensions, tolerances and terminology for recirculating ball, sleeve type, linear motion bearings.
This standard applies only to the size range covered by Table 1, ... -
ABMA 15
Abstract: This Standard specifies boundary dimensions and tolerances for bearings with spherical outside surfaces and extended inner ring width and eccentric locking collars. These bearings are frequently mounted in housings having ... -
ABMA B3.3
Abstract: During the manufacture of bearing components, there are many grinding processes which must be carefully controlled. These grinding processes can cause excessive localized heating of the metal being worked and result in ... -
ABMA B3.2
Abstract: This standard establishes a system for uniform visual acceptance criteria for aircraft engine, gearbox and accessory anti-friction bearings in continuous rotation applications made of the material listed in table 1.The ... -
ABMA B3.1
Abstract: This standard specifies a method for detection of discontinuities or nonhomogeneities in bearing components by means of eddy current interrogation. This standard is applicable to rolling element bearings used in aircraft ... -
ABMA 12.2
Abstract: This standard covers the characteristics that define inch design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for ... -
ABMA 12.1
Abstract: This standard covers the characteristics that define metric design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for ... -
ABMA 104
Abstract: This International Standard specifies the major boundary dimensions of single-direction and doubledirection thrust bearings with flat back faces.
In addition, it gives the minimum bore diameters of housing washers and ... -
ABMA 14
Abstract: This standard specifies boundary dimensions and tolerances for ball bearings with spherical outside surfaces and extended inner ring width. The feature of mating housing and bearing spherical surfaces is intended to provide ...