درباره ما
TIA - Telecommunications Industry Association: Recent submissions
Now showing items 1001-1020 of 1186
-
TIA TIA-41.540-E
Abstract: General
This specification supports systems conforming to air-interface technologies AMPS, NAMPS, TDMA and CDMA, including cdma2000®.1
1 cdma2000® is the ... -
TIA TIA-1142-A
Abstract: This document provides an interoperability specification for a RAN that supports eHRPD and handoff to and from E-UTRAN. The RAN architecture in this document logically locates the Session Control and Mobility Management ... -
TIA TIA-1121.008-1
Abstract: INTRODUCTION
Route Control Plane consists of following protocols:
• Route Control Protocol -
TIA TIA-136-334
Abstract: Foreword
TIA/EIA-136-334 specifies the Subnetwork Dependent Convergence Protocol (SNDCP) for packet-data service (GPRS-136). The SNDCP functions include multiplexing of several packet-data protocols, ... -
TIA TSB-19
Abstract: Purpose and Scope
This document provides engineering, operational, and maintenance guidance to users and suppliers of Optical Fiber Digital Transmission Systems for telecommunications applications. ... -
TIA TIA-968-B-1
Abstract: This addendum provides changes to TIA-968-B, Telecommunications – Telephone Terminal Equipment – Technical Requirements for Connection of Terminal Equipment to the Telephone Network. Clause 2 lists ... -
TIA TIA-470.110-C-1
Abstract: This standard provides handset acoustic performance requirements for Customer Premises Equipment (CPE) intended for connection to the Public Switched Telephone Network (PSTN). These requirements should ensure compatibility ... -
TIA IEB13
Abstract: INTRODUCTION
The purpose of this bulletin is to establish a uniform format for submission of technical data in conjunction with FCC type acceptance of Citizens Band radios.
A type acceptance filing should consist ... -
TIA TIA-890-B
Abstract: Scope of This Document
These technical requirements form a compatibility standard for test applications in cdma2000 high rate packet data systems. These requirements ensure that a compliant access ... -
TIA TIA-97-H
Abstract: This Standard details definitions, methods of measurement, and minimum performance requirements for Code Division Multiple Access (CDMA) base stations. This Standard shares the purpose of [3] (and subsequent revisions ... -
TIA TIA-455-87-B
Abstract: This test method may be used to test any type of fiber optic cable, using the appropriate Procedure and test parameters, as required by the Detail Specification. -
TIA TIA-136-730-A
Abstract: Purpose and Scope
This section describes a teleservice that is designed to support downloading of non-NAM programming information to an MS; an example of non-NAM programming information is that information ... -
TIA TIA-526-2
Abstract: SUMMARY
The following conditions will be obtained from the fiber optic terminal equipment detail specification:
Supply voltage(s) and/or current(s).
Data rate and input signal characteristics
Optical output ... -
TIA TIA-921-B
Abstract: This Standard is broadly applicable to the evaluation of any equipment that terminates or routes traffic using the Internet Protocol. This Standard can also be used to evaluate media streams or other protocols carried over ... -
TIA J-STD-036-C
Abstract: This Standard provides a solution for the handling of Wireless Enhanced Emergency Calls for the FCC E911 Phase II mandate.
Carrier position reporting to emergency services systems, as mandated by the Federal Communication ... -
TIA TIA-664.000-B
Abstract: This document outlines standard operational procedures proposed for a number of specific features. The particular features included for such description were selected with the following considerations in mind:
• ... -
TIA TIA-455-197
Abstract: In this procedure, a modulated light source at a given wavelength is coupled into the component under test, and the phase of the modulated signal exiting the fiber at a first polarization state is compared with the phase ... -
TIA TSB-474
Abstract: The intent of this document is to evaluate the aspects of Machine-to-Machine (M2M) communications that are required to ensure that cdma2000®1 network infrastructure is a viable communication network option ...