Now showing items 981-1000 of 1186

    • TIA TSB62-24 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2004
      Organization : TIA - Telecommunications Industry Association
      Abstract: Break Source Analysis (BSA) is a diagnostic tool intended to ascertain the break stress causing failure of optical fibers.
    • TIA TIA/EIA-455-81B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2000
      Organization : TIA - Telecommunications Industry Association
      Abstract: This test is intended to verify that filling and flooding compounds will not flow from a filled fiber optic cable at stated temperatures.(Footnote 1)
      NOTE: Filling and flooding compounds minimize water penetration ...
      Subject(s) : compound flow , drip , filled fiber optic cable , filling compound ,
    • TIA TIA-4957.210 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: Scope and Purpose
      This document defines a Forwarding sub-layer protocol and a Routing sub-layer protocol for the Data Link layer of TR51, including processes, functions, service interfaces and externally ...
    • TIA TIA-880-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document specifies the wireless intersystem network operation enhancements required for supporting roaming subscribers with Packet Data Service.
    • TIA TIA-41.690-E-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
    • TIA TIA-4963 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard specifies the electrical characteristics of generators and receivers that may be employed when specified for the interchange of binary signals in multipoint interconnection of digital equipment. When implemented ...
    • TIA TIA/EIA-136-933 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2000
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      TIA/EIA-136-933 describes the fixed-coding mode of the MAC (Medium Access Control) function specified in TIA/EIA-136-332. Higher layers and other functions within the RR (Radio Resource) ...
    • TIA TIA/EIA/IS-641-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;1998
      Organization : TIA - Telecommunications Industry Association
      Abstract: Preface
      This document gives a description of the Nokia/JSH speech and channel codec for the TIA IS-641 Enhanced Full Rate Codec. The codec consists of a 7.4 kbit/s ACELP speech codec and a 5.6 kbit/s ...
    • TIA TIA-455-15A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      Intent.1 The intent of this test is to demonstrate the ability of a fiber optic component device-to-cable attachment(s), and any interface area of mated component device seals, ...
    • TIA TIA-568-C.3-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard is applicable to premises optical fiber cabling components. Specified in this Standard are requirements for components, such as cable, connectors, connecting hardware and patch cords.
    • TIA TIA-124-E 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document describes the messages and procedures required to perform call detail record data transmission between systems.
    • TIA J-STD-025-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2006
      Organization : TIA - Telecommunications Industry Association
      Abstract: The scope of this Standard is to define the services to support LAES and the interface between a TSP and an LEA.
      Purpose
      The purpose of this Standard is to facilitate a TSP's compliance with the ...
    • TIA TSB-29-E 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      When the first edition of the Mobile Station – Land Station Compatibility Specification ( IS-3, now TIA/EIA-553-A ) was issued, it was envisioned that it would be ...
    • TIA TIA/EIA-732-1025 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: In many implementations of CS CDPD, a chief component is a modem bank functioning as a data link layer relay between a CM-ES and a Circuit Switched Mobile Data Intermediate System (CMD-IS). This Part specifies a set of ...
    • TIA TSB86 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;1999
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      This document provides technical background information on systems operating in the FS and the MSS in the 2.1 GHz frequency band (Section 2); delineates methods for evaluating the associated ...
    • TIA TIA-455-78B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: This part of IEC 60793 establishes uniform requirements for measuring the attenuation of optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes.
      Four methods are described for ...
    • TIA TIA-1160-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: The scope of this document covers support for PMIPv4 and PMIPv6 between PDSN and LMA/HA, called network PMIP. It includes network PMIP based Simple IP address assignment and network PMIP tunnel management. The transport ...
    • TIA TIA/EIA-732-930 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      This part specifies the Mobile Data Link Protocol (MDLP) Abstract Test Suite (ATS). Further, this part:
      • Defines specific terms relevant to the MDLP ATS
      • Discusses ...
    • TIA TIA-920.110-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: This standard establishes transmission performance requirements for handset devices that function as a wideband digital wireline telephone. Transmission may be over any digital interface including Local or Wide Area Networks, ...
    • TIA TIA-95-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2004
      Organization : TIA - Telecommunications Industry Association
      Abstract: PREFACE
      These technical requirements form a compatibility standard for 800 MHz cellular mobile telecommunications systems and 1.8 to 2.0 GHz Code Division Multiple Access (CDMA) Personal Communications ...