TIA - Telecommunications Industry Association: Recent submissions
Now showing items 81-100 of 1186
-
TIA TIA-455-229
Abstract: Specifically, the objectives are to:
• characterize both the short term and the long term robustness of components from damage due to optical power induced degradation or failure mechanisms
• provide ... -
TIA TIA-707.04-B
Abstract: General Description
Service Options 4, 4100 and 12 provide asynchronous (abbreviated as "async" hereafter) data transmission capability on CDMA2000® 1 wideband spread spectrum systems ... -
TIA TIA-136-037-A
Abstract: Purpose and Scope
This part describes the interface between the Mobile Equipment (ME) and the Removable User Identity Module (R-UIM) for the R-UIM Application Toolkit (RAPT). The RAPT builds upon the ... -
TIA TIA-102.AABC-C
Abstract: Project 25 digital radio systems will optionally support a trunking mode of operation. This document provides an overview of the essential attributes of the trunking control channel messaging such that, where systems are ... -
TIA TIA-102.BAAB-B
Abstract: This document lists a series of conformance tests for the Common Air Interface, defined in reference [2]. These tests are intended to assure that equipment actually conforms to the formats specified in the Common Air ... -
TIA TIA-455-172
Abstract: 1.0 INTENT
This procedure provides for a test to determine the ability of a cabled and mated connector (plug and receptacle) to resist firewall environments, such as flame or ignition of gases. Optical operation is ... -
TIA TIA-4962
Abstract: This document is focused on the numbering, identification, and addressing aspects of M2M technologies and services using 3GPP2 specifications. The following activities were executed in the development of this document: ... -
TIA TIA-688
Abstract: This Standard is applicable to the interconnection of data terminal equipment (DTE) and data circuit-terminating equipment (DCE) employing serial binary data interchange. It defines: Section
2 NORMATIVE REFERENCES ... -
TIA TIA-668-A
Abstract: This standard defines the image format, line format, synchronization method, and modulation method suitable for the transmission of images over noisy, low-bandwidth audio channels especially HF radio links.
Although ... -
TIA TIA/EIA-604-12
Abstract: FOCIS 12 presents the intermateability standard for connectors with the commercial designation of MT-RJ, and is used as an addendum to TIA/EIA-604, Fiber Optic Connector Intermateability Standards. The provisions ... -
TIA TIA-492AAAC-B
Abstract: This Detail Specification applies to class Ia, graded-index, 50/125 μm multimode optical fiber used as a component in the manufacture of fiber-optic cable.
Applications include, but are not restricted to, the ...Subject(s) : and detail specification , differential mode delay (DMD) , effective modal bandwidth , laser optimized , multimode , -
TIA TIA-1040.2.03
Abstract: The present document defines the communication interface between a TC-SES BSM Regenerative Satellite Mesh-A (RSM-A) air interface compliant Satellite Terminal (ST) and the Security Access Module (SAM). It specifies the ... -
TIA TIA/EIA/IS-725-A
Abstract: Specifically, this document includes Stage-1 recommendations for OTASP Subscriber Feature and OTAPA Network Feature Descriptions. It also provides intersystem operation recommendations for supporting the ... -
TIA TIA-472G000
Abstract: General Overview
This Standard covers optical fiber communications cables intended for installation in underground sewers, specifically storm and sanitary sewers. Materials, construction, and performance ... -
TIA TIA-4945-A
Abstract: This document provides the requirements for Dynamic RAN Power Management (DRPM). DRPM allows operators to control the power usage of RAN equipment dynamically. Such control includes powering off RAN equipment in times of ... -
TIA TIA-102.CACD-B
Abstract: INTRODUCTION
The purpose of this standard is to define procedures for testing the interoperability of RFSSs operating in trunked voice mode. Each RFSS is interconnected using an ISSI to test the ... -
TIA TIA-596
Abstract: The requirements in this Standard apply to a device between an end-user DTE and the network interface (NI) of an intraLATA or interLATA carrier generally referred to as NCTE and herein referred to as SCDSU. This Standard ... -
TIA TIA-2000.1-F
Abstract: The technical requirements contained in cdma2000 form a compatibility standard for CDMA systems. They ensure that a mobile station can obtain service in a system manufactured in accordance with the cdma2000 standards. The ... -
TIA TSB-102.CBBK-A
Abstract: This Bulletin identifies the tests that Trunking equipment is expected to pass in order for a manufacturer to declare P25 Compliance in the area of Trunking ISSI for Voice and Mobility Services. These tests were deemed ...