SMD-5962-92347 REV D

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, LINEAR, HIGH SPEED, VOLTAGE COMPARATOR WITH LATCH, MONOLITHIC SILICON

Organization:

Year: 2007

Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN is as shown in the following example:

Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) identify the circuit function as follows:

     Device type     Generic number                   Circuit function           01             AD9696               Single voltage comparator with latch          02             AD9698               Dual voltage comparator with latch          03             AD9696               Single voltage comparator with latch

The device class designator is a single letter identifying the product assurance level as follows:

        Device class                     Device requirements documentation              M             Vendor self-certification to the requirements for MIL-STD-883 compliant,                           non-JAN class level B microcircuits in accordance with MIL-PRF-38535,                           appendix A            Q or V          Certification and qualification to MIL-PRF-38535

The case outline(s) are as designated in MIL-STD-1835 and as follows:

        Outline letter        Descriptive designator          Terminals          Package style                E              GDIP1-T16 or CDIP2-T16              16          Dual-in-line               H              GDFP1-F10 or CDFP2-F10              10          Flat pack               I              MACY1-X10                           10          Can               P              GDIP1-T8 or CDIP2-T8                 8          Dual-in-line               X              See figure 1                         8          Dual small outline with gullwing leads               Y              See figure 2                        16          Dual small outline with gullwing leads

The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.

  Supply voltage range (±V_S)  .........................  ±7 V dc   Input voltage range (V_IN)  ..........................  ±5 V   Differential input voltage  .........................  5.4 V   Latch enable voltage range  .........................  −0.5 V to +V_S   Output current (continuous)  ........................  20 mA   Power dissipation (P_D)  .............................  600 mW   Lead temperature (soldering 10 seconds)  ............  +300°C   Storage temperature range  ..........................  −65°C to +150°C   Junction temperature  ...............................  +175°C   Thermal resistance, junction-to-ambient (Θ_JA):    Cases E and Y  .....................................  90°C/W    Case H  ............................................  140°C/W    Case I  ............................................  170°C/W    Cases P and X  .....................................  110°C/W   Thermal resistance, junction-to-case (Θ_JC):    Cases E, I, and P  .................................  See MIL-STD-1835    Case H  ............................................  60°C/W    Case X  ............................................  20°C/W    Case Y  ............................................  25°C/W

  Supply voltage range (±V_S)  .........................  ±5 V dc   Ambient operating temperature range (T_A)  ...........  −55°C to +125°C

Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.

URI: https://yse.yabesh.ir/std/handle/yse/165397

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T17:42:22Z
date available	2017-09-04T17:42:22Z
date copyright	07/23/2007
date issued	2007
identifier other	EANRACAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/165397
description abstract	This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN is as shown in the following example: Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 AD9696 Single voltage comparator with latch 02 AD9698 Dual voltage comparator with latch 03 AD9696 Single voltage comparator with latch The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line H GDFP1-F10 or CDFP2-F10 10 Flat pack I MACY1-X10 10 Can P GDIP1-T8 or CDIP2-T8 8 Dual-in-line X See figure 1 8 Dual small outline with gullwing leads Y See figure 2 16 Dual small outline with gullwing leads The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Supply voltage range (±V_S) ......................... ±7 V dc Input voltage range (V_IN) .......................... ±5 V Differential input voltage ......................... 5.4 V Latch enable voltage range ......................... −0.5 V to +V_S Output current (continuous) ........................ 20 mA Power dissipation (P_D) ............................. 600 mW Lead temperature (soldering 10 seconds) ............ +300°C Storage temperature range .......................... −65°C to +150°C Junction temperature ............................... +175°C Thermal resistance, junction-to-ambient (Θ_JA): Cases E and Y ..................................... 90°C/W Case H ............................................ 140°C/W Case I ............................................ 170°C/W Cases P and X ..................................... 110°C/W Thermal resistance, junction-to-case (Θ_JC): Cases E, I, and P ................................. See MIL-STD-1835 Case H ............................................ 60°C/W Case X ............................................ 20°C/W Case Y ............................................ 25°C/W Supply voltage range (±V_S) ......................... ±5 V dc Ambient operating temperature range (T_A) ........... −55°C to +125°C Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
language	English
title	SMD-5962-92347 REV D	num
title	MICROCIRCUIT, LINEAR, HIGH SPEED, VOLTAGE COMPARATOR WITH LATCH, MONOLITHIC SILICON	en
type	standard
page	17
status	Active
tree	DLA - CC - DLA Land and Maritime:;2007
contenttype	fulltext