CSA C22.2 NO. 156-M1987

CSA - CSA Group

Solid-State Speed Controls - First Edition; General Instruction No. 1: November 1987

Organization:

Year: 2009

Abstract: This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I.
This Standard applies to controls that may incorporate a switch to place an air gap in series with the motor; and when provided with a series switch,
(a) incorporate solid-state components in a phase shift network to provide a controlled voltage output and designed so that
(I) Type I: the ON/OFF function is independent of the output voltage setting; or
(ii) Type II: the ON/OFF function can be operated at minimum output voltage setting only; or
(iii) Type Ill: the ON/OFF function can be operated at maximum output voltage setting only; or
(b) (Type IV) incorporate solid-state components to provide one or more, but not an infinite number of positions of control.
This Standard applies to controls intended for
(a) flush mounting;
(b) surface mounting;
(c) use as a table-mounted control to which a portable motor can be temporarily connected;
(d) installation in other equipment as part of the control package for that equipment;
e) permanent installation in the supply line of a motor; or
(f) other similar applications within the general outline above.
This Standard does not apply to resistor, transformer, and variable frequency type motor speed controls.

URI: https://yse.yabesh.ir/std/handle/yse/165514

Collections :

CSA - CSA Group

Show full item record

contributor author	CSA - CSA Group
date accessioned	2017-09-04T17:42:28Z
date available	2017-09-04T17:42:28Z
date copyright	1987.11.01 (R 2009)
date issued	2009
identifier other	EAWCDFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/165514
description abstract	This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I. This Standard applies to controls that may incorporate a switch to place an air gap in series with the motor; and when provided with a series switch, (a) incorporate solid-state components in a phase shift network to provide a controlled voltage output and designed so that (I) Type I: the ON/OFF function is independent of the output voltage setting; or (ii) Type II: the ON/OFF function can be operated at minimum output voltage setting only; or (iii) Type Ill: the ON/OFF function can be operated at maximum output voltage setting only; or (b) (Type IV) incorporate solid-state components to provide one or more, but not an infinite number of positions of control. This Standard applies to controls intended for (a) flush mounting; (b) surface mounting; (c) use as a table-mounted control to which a portable motor can be temporarily connected; (d) installation in other equipment as part of the control package for that equipment; e) permanent installation in the supply line of a motor; or (f) other similar applications within the general outline above. This Standard does not apply to resistor, transformer, and variable frequency type motor speed controls.
language	English
title	CSA C22.2 NO. 156-M1987	num
title	Solid-State Speed Controls - First Edition; General Instruction No. 1: November 1987	en
type	standard
page	27
status	Active
tree	CSA - CSA Group:;2009
contenttype	fulltext