MIL-E-24617A

Abstract

This specification covers the composition and quality of reagent chemicals used for testing hardness in shipboard boiler feedwater. <br>The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see <a>6.2</a>). </span><pre> SPECIFICATIONS FEDERAL <cite>A-A-20135</cite> - Sugar, Refined and Sugar, Brown. <cite>PPP-C-2020</cite> - Chemicals, Liquid, Dry, and Paste: Packaging of.</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, SEA 03R42, Naval Sea Systems Command, 2531 Jefferson Davis Hwy, Arlington, VA 22242-5160 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <pre> STANDARDS FEDERAL <cite>FED-STD-313</cite> - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities. MILITARY <cite>MIL-STD-129</cite> - Marking for Shipment and Storage.</pre> <br> <br>(Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, BLDG. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) <br>The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. <pre> DEPARTMENT OF LABOR (OSHA) Code of Federal Regulations (CFR) <cite>CFR 29, Part 1910.1200</cite> - Hazard Communication Standard. DEPARTMENT OF TRANSPORTATION (DOT) Code of Federal Regulations (CFR) <cite>CFR 49, Part 100-199</cite> - Hazardous Material Regulations.</pre> <br> <br>(Application for copies should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.) <br>The following documents) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see <a>6.2</a>). <pre> AMERICAN CHEMICAL SOCIETY (ACS) Specifications - Reagent Chemicals.</pre> <br> <br>(Application for copies should be addressed to Applied Publications, American Chemical Society, 1155 16th Street, NW, Washington, DC 20036.) <pre> AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) <cite>D 1126</cite> - Standard Test Method for Hardness in Water. (DoD adopted) <cite>D 1193</cite> - Standard Specification for Reagent Water. (DoD adopted) <cite>D 3082</cite> - Standard Test Method for Boron in Water. <cite>D 3113</cite> - Standard Test Methods for Sodium Salts of EDTA in Water. <cite>D 4192</cite> - Standard Test Method for Potassium in Water by Atomic Absorption Spectroscopy. <cite>E 1252</cite> - Standard Practice for General Techniques for Qualitative Infrared Analysis.</pre> <br> <br>(Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) <pre> AMERICAN PUBLIC HEALTH ASSOCIATION (APHA) Standard Method 4500-S^2- Sulfide</pre> <br> <br>(Application for copies should be addressed to the American Public Health Association, 1015 Fifteen Street, NW, Washington, DC 20005.) <pre> AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) Colour Index, 3rd Edition, Volume 1-4: The Society of Dyers and Colourists, Bradford, England and American Association of Textile Chemists and Colorists, 1971.</pre> <br> <br>(Application for copies should be addressed to the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709.) <br>(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) <br>In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. <br><b><u>Intended Use:</u></b> The reagents covered by this specification are intended to be used for the determination of hardness in boiler feedwater. <br>