IEEE C37.66

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) IEEE 3 Park Avenue New York, NY 10016-5997, USA 22 March 2006 IEEE Power Engineering Society Sponsored by the Switchgear Committee

Organization:

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Year: 2005

Abstract: This standard applies to single- or multi-pole ac switches for rated maximum voltage above 1 kV to 38 kV for use in switching shunt capacitor banks (see the note in this clause). This standard covers the application of capacitive load switching wherein the capacitive loads are separated by sufficient inductance to limit the high-frequency transient-making peak current to the peak values shown in Table 2 and Table 3. Switches designed and built in accordance with this standard are not intended for use as fault current or noncapacitive load current interrupting devices.
NOTE—This standard is intended to be a comprehensive standard for all “specific duty” applications of switches in the area of switching shunt capacitor banks, but it is limited in scope up to and including 38 kV. However, subject to agreement between the user and manufacturer, it may be used as a specification guide for other rated voltages.¹
^1_Notesin text, tables, and figures of a standard are given for information only, and do not contain requirements needed to implement the standard.

URI: https://yse.yabesh.ir/std/handle/yse/168054

Subject: back-to-back capacitor switching

Collections :

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Show full item record

contributor author	IEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned	2017-09-04T17:44:59Z
date available	2017-09-04T17:44:59Z
date copyright	09/22/2005
date issued	2005
identifier other	EHQZIBAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/168054
description abstract	This standard applies to single- or multi-pole ac switches for rated maximum voltage above 1 kV to 38 kV for use in switching shunt capacitor banks (see the note in this clause). This standard covers the application of capacitive load switching wherein the capacitive loads are separated by sufficient inductance to limit the high-frequency transient-making peak current to the peak values shown in Table 2 and Table 3. Switches designed and built in accordance with this standard are not intended for use as fault current or noncapacitive load current interrupting devices. NOTE—This standard is intended to be a comprehensive standard for all “specific duty” applications of switches in the area of switching shunt capacitor banks, but it is limited in scope up to and including 38 kV. However, subject to agreement between the user and manufacturer, it may be used as a specification guide for other rated voltages.¹ ^1_Notesin text, tables, and figures of a standard are given for information only, and do not contain requirements needed to implement the standard.
language	English
title	IEEE C37.66	num
title	Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) IEEE 3 Park Avenue New York, NY 10016-5997, USA 22 March 2006 IEEE Power Engineering Society Sponsored by the Switchgear Committee	en
type	standard
page	43
status	Active
tree	IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
contenttype	fulltext
subject keywords	back-to-back capacitor switching
subject keywords	capacitor load
subject keywords	capacitor switches
subject keywords	inrush current
subject keywords	operation
subject keywords	pole discrepancy
subject keywords	probability or restrike classification
subject keywords	restrike
subject keywords	simultaneous operation